CHANNEL AS 6I1009 - Caterpillar

6I1009 CHANNEL AS Caterpillar parts 918F, 924F, IT18F, IT24F

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6I1009
6I-1009
6I1009

Weight: 4 pounds 2 kg.

Buy CHANNEL AS 6I1009 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER, WHEEL LOADER,

Compatible equipment models: 6I1009:

INTEGRATED TOOLCARRIER IT18F IT24F

WHEEL LOADER 918F 924F Caterpillar

Number on catalog scheme: 19

Caterpillar 6I1009 Parts scheme CHANNEL AS

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt
(M16 x 2 by 4 inch) 1
B 138-7573 Link Bracket 1
C FT-2711 Special Bolt 2
D 9S-3263 Thread Lock Compound 1
Raise the temperature of the flywheel ring gear. Do not use a torch to heat the flywheel ring gear. Install the flywheel ring gear on the flywheel. Position the flywheel ring gear with the part number toward the crankshaft. Allow the flywheel ring gear to cool. Use a soft hammer in order to seat the flywheel ring gear against the shoulder of the flywheel.
Illustration 1 g01138041
Attach Tooling (B) and a suitable lifting device to flywheel (2). The weight of flywheel (2) is approximately 40 kg (85 lb).
Position flywheel (2) on Tooling (A).
Apply Tooling (D) to the threads of bolts (1). Note: Tooling (C) should be removed at this time, if Tooling (C) was used in the removal procedure for the flywheel.
Install bolts (1). Remove Tooling (A) and install remaining bolt (1). Tighten the bolts evenly to a torque of 300 40 N m (221 30 lb ft).
Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel - Inspect".