CHANNEL 7V8282 - Caterpillar

Table 1
Machine     Effective With     Adaptable To    
R1600G     -     (S/N: 9PP155-UP)    
R1600G     (S/N: 9YZ720-UP)     (S/N: 9YZ1-719)    Refer to the following procedure in order to route the 227-6998 Wiring Harness correctly.Procedure to Route the 227-6998 Wiring Harness
Personal injury can result from flame cutting or welding on painted areas.The effect of gasses from burned paint is a hazard to the person doing the cutting or welding.Do not flame cut or weld on painted areas.
Personal injury or death can result from fumes, gases and ultraviolet rays from the weld arc.Welding can cause fumes, burn skin and produce ultraviolet rays.Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing area. Wear eye, ear and body protection before working.Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can cause death.Read and understand the manufacturer's instructions and your employer's safety practices. Do not touch live electrical parts.See "American National Standard Z49.1, Safety in Welding and Cutting" published by the American Welding Society.American Welding Society
2501 N.W. 7th Street
Miami, Florida 33125
See "OSHA Safety and Health Standards, 29 CFR 1910", available from U.S. Department of Labor.U.S. Department of Labor
Washington, D.C. 20210
Illustration 1 g02847096
(1) 282-5419 Plate As
Illustration 2 g02847116
(1) 282-5419 Plate As (2) 227-6998 Wiring Harness (3) 5F-9757 Grommet
Disconnect 227-6998 Wiring Harness (2) .
Remove 282-5419 Plate As (1) .
Remove and retain 5F-9757 Grommet (3) from 282-5419 Plate As (1) .
Illustration 3 g02847136
(1) 282-5419 Plate As (4) 30 mm (1.20 inch) hole
Fill hole (4) with weld.
Grind flush the weld.
Illustration 4 g02847157
(1) 282-5419 Plate As (5) 30 mm (1.20 inch) hole (A) 430 mm (16.90 inch) (B) 190 mm (7.50 inch)
Drill one hole (5) in 282-5419 Plate As (1) .
Illustration 5 g02847116
(1) 282-5419 Plate As (2) 227-6998 Wiring Harness (3) 5F-9757 Grommet
Install 5F-9757 Grommet (3) in 282-5419 Plate As (1) .
Install 282-5419 Plate As (1), routing 227-6998 Wiring Harness (2) through hole (5) .
Connect 227-6998 Wiring Harness (2) .