CHANNEL ASSEM. 8D1127 - Caterpillar

8D1127 CHANNEL ASSEM. Caterpillar parts 16

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8D1127
8D-1127
8D1127

Weight: 3 pounds 1 kg.

Buy CHANNEL ASSEM. 8D1127 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 8D1127:

MOTOR GRADER 16 Caterpillar

Number on catalog scheme: None

Caterpillar 8D1127 Parts scheme CHANNEL ASSEM.

For full view, you need register

Information:

Removal Procedure
The Power Train Electric Drive System and the Accessory Power System will contain hazardous voltage levels during machine operation and for a period of time after machine shutdown.Do not remove any covers that will expose energized electrical components while the engine is operating. Do not remove any covers that will expose the energized electrical components while the components remain energized following an engine shutdown.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the engine is operating.Do not perform any type of electrical maintenance on the orange hazardous voltage conductors, the power train components or the accessory power system components while the components remain energized following an engine shutdown.Always perform the safe shutdown and de-energizing procedure before performing electrical service on the Power Train Electric Drive System or the Accessory Power System.Failure to follow these instructions could result in personal injury or death.
The two top compartments on the front of the Inverter Cabinet contain low voltage control components. All of the other compartments in the cabinet contain high voltage components. The "Electrical Shutdown and Voltage Discharge" procedure must be performed before any of the high voltage compartments are entered.
Prepare the machine for maintenance. Refer to Operation and Maintenance Manual , "Prepare the Machine for Maintenance".
Shutdown and de-energizing the machine. Refer to Operation and Maintenance Manual, "Electrical Shutdown and Voltage Discharge".
Illustration 1 g03795101
Remove cover assembly (1).
Illustration 2 g03795103
Disconnect harness assemblies (2) from each of the bulk capacitors (3). Note: Using a jumper harness, short bulk capacitors (3) by connecting the positive lead and negative lead in series.
Remove mounting bolts (4). Remove bulk capacitor assembly (5).
Repeat Step 4 and Step 5 for the remaining bulk capacitor assembly (5). Installation Procedure
Install capacitor assembly (5) in the reverse order of removal.