CHARGING KIT- 1216583 - Caterpillar

Engine Speed - Turn the engine speed dial in order to control the engine speed (engine rpm). Select the desired position from the ten available positions. The selected position of the engine speed dial is indicated on the electronic monitor panel.
Decrease - Turn the engine speed dial counterclockwise in order to decrease the engine speed (engine rpm).
Increase - Turn the engine speed dial clockwise in order to increase the engine speed (engine rpm).Air Conditioning and Heating Control (10)
The heater/air conditioner provides comfort for the operator that is working under various temperature conditions. For more information on the air conditioning and heating controls, refer to Operation and Maintenance Manual, "Air Conditioning and Heating Control".Operators Seat (11)
The operators seat has various adjustments in order to meet a wide range of operators. For more information, refer to Operation and Maintenance Manual, "Seat".Seat Heater (12) (If Equipped)
Preexisting skin conditions can be aggravated by continued use of the seat heater. If skin condition worsens, discontinue use of the seat heater.
Seat Heater - In cold weather, the seat heater can be activated in order to improve operator comfort.
ON - Push down on the top of the seat heater switch in order to activate the seat heater.
OFF - Push down on the bottom of the seat heater switch in order to deactivate the seat heater.
Do not leave any heavy item or object with a sharp point on the seat.Do not cover the seat or seat back with a blanket, seat cushion or any other similar covering. The seat heater can be over heated. Be sure to remove any spills on the seat and thoroughly dry the spill.
Note: The thermostat in the seat heater deactivates when the temperature in the cab is above 10°C (50°F). The seat heater will not operate when the thermostat is deactivated.Radio (13)
This machine may be equipped with a radio. For more information, refer to Operation and Maintenance Manual, "Radio".Travel Alarm Cancel Switch (If Equipped) (14)
Travel Alarm Cancel Switch - This switch is used to stop the travel alarm from sounding. Press the switch in order to stop the alarm. The indicator lamp will turn on.Note: The travel alarm is located under the hydraulic tank. The travel alarm will sound when the travel lever or the travel pedal is activated.Overload Warning Device (15) (If Equipped)
The switch for the overload warning device is located on the right console.
Overload Warning Device - In lifting applications, the overload warning device activates a buzzer when there is an unstable load condition. When this occurs, the bucket load should be reduced or the stick should be moved inward.ON - Push the right side of the switch in order to deactivate the overload warning device.OFF - Push the left side of the switch in order to activate the overload warning device.Hydraulic Lockout Control (16)
Deactivation of the hydraulic controls does not prevent the blade, boom swing,