CHASSIS AR 3464584 - Caterpillar

Illustration 1 g01792216
Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the boom, the stick nose, and the cylinder pin bores. (1) 134-9031 Pin As Pin diameter ... 99.850 0.040 mm (3.9311 0.0016 inch) Bore diameter for the pin assembly ... 100.043 0.043 mm (3.9387 0.0017 inch) (2) As required, use the following shims to adjust the maximum lateral clearance of 1.0 mm (0.04 inch): 133-2427 Shim Quantity ... 2 Thickness of one shim ... 0.5 mm (0.02 inch) 093-0090 Shim Quantity ... 4 Thickness of one shim ... 1.0 mm (0.04 inch) 093-0122 Shim Quantity ... 2 Thickness of one shim ... 2.0 mm (0.08 inch) (3) Lubricate the sealing lip of four lip type seals lightly with the lubricant that is being sealed.Note: Install the following sleeve bearings in the bore so that the part number of each sleeve bearing is facing outward. (4) 234-3749 Sleeve Bearing Quantity ... 2 Inside diameter ... 130.36 0.04 mm (5.132 0.002 inch) Outside diameter ... 154.270 0.013 mm (6.0736 0.0005 inch) Installation depth of the sleeve bearing ... 9.5 0.8 mm (0.37 0.03 inch) (5) 228-5617 Sleeve Bearing Quantity ... 2 Inside diameter ... 100.29 0.04 mm (3.948 0.002 inch) Outside diameter ... 116.230 0.013 mm (4.5760 0.0005 inch) Installation depth of the sleeve bearing ... 9.5 0.8 mm (0.37 0.03 inch)