3C8116 CHASSIS OPT AR Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8116
3C-8116
3C8116
CA3C8116
3C-8116
3C8116
Weight: 4 pounds 2 kg.
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1 Start By:
Remove the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01273491
Remove bolts (2) and remove support assembly (3). Disconnect cable assembly (1). Disconnect hose assembly (4).
Illustration 2 g01177926
Disconnect harness assemblies (5), (6), and (7).
Disconnect tube assembly (8) from the turbocharger.
Disconnect hose assembly (9).
Remove bolts (10).
Illustration 3 g01177988Note: Use caution in order not to damage the tips of the injectors.
Attach Tooling (A) and a suitable lifting device onto cylinder head (11). The weight of cylinder head (11) is approximately 181 kg (400 lb). Remove cylinder head (11) and the gasket.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1 Start By:
Remove the rocker arm and shaft. Refer to Disassembly and Assembly, "Rocker Arm and Shaft - Remove".
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the fan drive. Refer to Disassembly and Assembly, "Fan Drive - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g01273491
Remove bolts (2) and remove support assembly (3). Disconnect cable assembly (1). Disconnect hose assembly (4).
Illustration 2 g01177926
Disconnect harness assemblies (5), (6), and (7).
Disconnect tube assembly (8) from the turbocharger.
Disconnect hose assembly (9).
Remove bolts (10).
Illustration 3 g01177988Note: Use caution in order not to damage the tips of the injectors.
Attach Tooling (A) and a suitable lifting device onto cylinder head (11). The weight of cylinder head (11) is approximately 181 kg (400 lb). Remove cylinder head (11) and the gasket.