CIRCLE AND BEAM ASSEMBLY 2G3976 - Caterpillar

Lubricant Capacities
The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require additional oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.
Table 1
C175-16 Standard, Shallow Sump Refill Capacities
With oil filter change 530 L (140 US gal)
Without oil filter change 499.6 L (132 US gal)
Factory fill 598 L (158 US gal)
Volume between "ADD" and "Full" marks on the engine oil level gauge (dipstick). 94.6 L (25 US gal)
Table 2
C175-16 Aluminum Sump Refill Capacities
With oil filter change 530 L (140 US gal)
Without oil filter change 499.6 L (132 US gal)
Factory fill 598 L (158 US gal)
Volume between "ADD" and "Full" marks on the engine oil level gauge (dipstick). 94.6 L (25 US gal)
Table 3
C175-16 Deep Sump Refill Capacities
With oil filter change 681 L (180 US gal)
Without oil filter change 662.4 L (175 US gal)
Factory fill 757 L (200 US gal)
Volume between "ADD" and "FULL" marks on the engine oil level gauge (dipstick). 94.6 L (25 US gal) Fuel Injection Pump (Wet Sump Pump)
Table 4
Fuel Injection Pump 900 mL (30.6 oz) Coolant Capacities
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity can include the following components: engine, expansion tank, heat exchanger, radiator, keel cooler and piping.Refer to the specifications that are provided by Caterpillar or the OEM of the installation. Record the total cooling system capacity in the appropriate Table.
Table 5
Approximate Refill Capacities for the C175 Engine Cooling System with Separate Circuit Aftercooling
Compartment or System Liters US Gallons
Jacket water system
Separate circuit aftercooler
External system
Total cooling system