3387508 CIRCLE GP Caterpillar parts
120K, 120K 2
Rating:
Alternative (cross code) number:
CA3387508
338-7508
3387508
CA3387508
338-7508
3387508
MOTOR GRADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
NEW OEM HARLEY-DAVIDSON SHIFTER LEVER ASY 33875-08
Harley-Davidson SHIFTER LEVER ASY || 33875-08 || VehiclePartsAndAccessories
Harley-Davidson SHIFTER LEVER ASY || 33875-08 || VehiclePartsAndAccessories
HARLEY-DAVIDSON SHIFTER LEVER ASY
Harley-Davidson Seller warrants that the parts being purchased hereunder were purchased by seller from the original equipment manufacturer and that seller holds the legal title to such parts and has the right to sell such parts. Such parts are sold by seller “as is.” Without any express warranties except as to source and title, and without and statutory implied warranties or either merchantability or fitness. Seller shall not be responsible for any consequential or incidental damages arising out of the sale || VehiclePartsAndAccessories
Harley-Davidson Seller warrants that the parts being purchased hereunder were purchased by seller from the original equipment manufacturer and that seller holds the legal title to such parts and has the right to sell such parts. Such parts are sold by seller “as is.” Without any express warranties except as to source and title, and without and statutory implied warranties or either merchantability or fitness. Seller shall not be responsible for any consequential or incidental damages arising out of the sale || VehiclePartsAndAccessories
Number on catalog scheme:
For full view, you need register
Information:
Machine Preparation
Move the machine to a smooth horizontal location. Move away from working machines and personnel. Lower the work tools to the ground.
Allow only one operator on the machine. Keep all personnel away from the machine or in the view of the operator.
Engage the parking brake.
Illustration 1 g06045044
Place the steering frame lock in the LOCKED position.Reference: For information about preparing a machine for troubleshooting, refer to the Testing and Adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Hydraulic Fan Speed (Testing and Adjusting)
Place the transmission in the NEUTRAL position. Engage the parking brake. Connect Caterpillar Electronic Technician (ET) to the diagnostic connector. The diagnostic connector is located to the left and behind the operator seat.
Illustration 2 g02427958
Start ET. When ET initializes, select the engine ECM from the choices that are available. Refer to Illustration 2.
Illustration 3 g02428248
Illustration 4 g02428436
Check all fault codes under the engine ECM. Ensure that no faults are present in the fan drive system. Ensure that no faults are present with the hydraulic oil temperature sensor, engine coolant temperature sensor and inlet manifold temperature sensor. If no faults are present, ensure that economy mode is “disabled” in the transmission or Power Train ECM configuration. Begin the calibration. Select "Service > Calibrations > Engine Cooling Fan Calibration". Refer to Illustration 3 and Illustration 4.
Illustration 5 g02428259
The screen that is shown in Illustration 5 will appear. Follow the instructions on the screen. Click on "OK".
Illustration 6 g02428276
The "Calibrations" screen will appear. Select both check boxes. Click on "Begin".
Illustration 7 g02428376
Ensure that the parking brake is set. Run the engine at high idle. Click on "Next" in the lower left corner of the screen.
Continue running the machine at high idle. Use the photo tach to measure the fan speed. Adjust the current for the fan solenoid by using the arrows at the bottom of the screen. Increasing the current will decrease the fan speed. Decreasing the current will increase the fan speed. Adjust the current until the fan speed is 500 50 rpm.Note: If the machine is equipped with the variable pitch fan, set the fan speed to 575 125 rpm.Note: The procedure on the screen may specify
Move the machine to a smooth horizontal location. Move away from working machines and personnel. Lower the work tools to the ground.
Allow only one operator on the machine. Keep all personnel away from the machine or in the view of the operator.
Engage the parking brake.
Illustration 1 g06045044
Place the steering frame lock in the LOCKED position.Reference: For information about preparing a machine for troubleshooting, refer to the Testing and Adjusting, "Machine Preparation for Troubleshooting" for the machine that is being serviced.Hydraulic Fan Speed (Testing and Adjusting)
Place the transmission in the NEUTRAL position. Engage the parking brake. Connect Caterpillar Electronic Technician (ET) to the diagnostic connector. The diagnostic connector is located to the left and behind the operator seat.
Illustration 2 g02427958
Start ET. When ET initializes, select the engine ECM from the choices that are available. Refer to Illustration 2.
Illustration 3 g02428248
Illustration 4 g02428436
Check all fault codes under the engine ECM. Ensure that no faults are present in the fan drive system. Ensure that no faults are present with the hydraulic oil temperature sensor, engine coolant temperature sensor and inlet manifold temperature sensor. If no faults are present, ensure that economy mode is “disabled” in the transmission or Power Train ECM configuration. Begin the calibration. Select "Service > Calibrations > Engine Cooling Fan Calibration". Refer to Illustration 3 and Illustration 4.
Illustration 5 g02428259
The screen that is shown in Illustration 5 will appear. Follow the instructions on the screen. Click on "OK".
Illustration 6 g02428276
The "Calibrations" screen will appear. Select both check boxes. Click on "Begin".
Illustration 7 g02428376
Ensure that the parking brake is set. Run the engine at high idle. Click on "Next" in the lower left corner of the screen.
Continue running the machine at high idle. Use the photo tach to measure the fan speed. Adjust the current for the fan solenoid by using the arrows at the bottom of the screen. Increasing the current will decrease the fan speed. Decreasing the current will increase the fan speed. Adjust the current until the fan speed is 500 50 rpm.Note: If the machine is equipped with the variable pitch fan, set the fan speed to 575 125 rpm.Note: The procedure on the screen may specify
Caterpillar SIS machinery equipment:
Caterpillar SIS
120K Motor Grader SZN00001-UP (MACHINE) POWERED BY C7 Engine »
338-7508
CIRCLE GP
120K Motor Grader JAP00001-UP (MACHINE) POWERED BY C7 Engine »
338-7508
CIRCLE GP
140K Motor Grader SZL00001-UP (MACHINE) POWERED BY C7 Engine »
338-7508
CIRCLE GP
120K Series 2 Motor Grader SZS00001-UP (MACHINE) POWERED BY C7 Engine »
338-7508
CIRCLE GP
Caterpillar parts catalog:
Parts circle Caterpillar catalog:
4215047
CIRCLE GP
120K, 120K 2
120K, 120K 2
4178149
CIRCLE GP
120K, 120K 2
120K, 120K 2
3968955
CIRCLE GP
120K, 120K 2
120K, 120K 2
3474645
CIRCLE GP
120K, 120K 2
120K, 120K 2
4215048
CIRCLE GP
120K, 120K 2
120K, 120K 2
8W3656
CIRCLE AS
120G, 120H, 120K, 120K 2, 135H
120G, 120H, 120K, 120K 2, 135H
3418347
CIRCLE AS
120K, 120K 2
120K, 120K 2
1539360
CIRCLE GP
120H, 12H, 12H ES, 12H NA, 12K, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160K
120H, 12H, 12H ES, 12H NA, 12K, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160K
3968955
CIRCLE GP
120K, 120K 2
120K, 120K 2
4178149
CIRCLE GP
120K, 120K 2
120K, 120K 2
6G2943
CIRCLE AS
12G, 140G, 160G
12G, 140G, 160G
6G2900
CIRCLE AS
130G
130G
9D6505
CIRCLE GP
120H ES, 130G
120H ES, 130G
2C8282
CIRCLE GP
120G
120G