CIRCUIT-INTEGRATED 1439055 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     9U-7370     Belt Tension Test Tool     1    Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, SENR1500, "Wheel Chocks (Front and Rear) - Remove and Install".
Illustration 1 g00586081
Remove nut (2) and the washer that holds cable assembly (3) to alternator (1). Place cable assembly (3) aside.
Illustration 2 g00586082
Remove bolt (4) and the washer that holds cable assembly (5) to alternator (1). Place cable assembly (5) aside.
Remove nut (7) (not shown) that holds wire harness (6) to alternator (1). Remove bolt (8), the washer, and the clip that holds wire harness (6) to alternator (1). Place wire harness (6) aside.
Illustration 3 g00586083
Loosen bolt (9) and the nut that holds alternator (1) to alternator support (10) .
Illustration 4 g00586084
Loosen bolt (11) and the nut that holds rod (12) to alternator support (10). Loosen two nuts (13) on rod (12). Position alternator (1) toward the engine.
Illustration 5 g00587309
Remove two nuts (15) and the washers that hold alternator guard (14) to alternator (1). Remove alternator guard (14) from alternator (1) .
Illustration 6 g00587358
Remove bolt (17), the washer, and the spacer that holds rod (12) to alternator (1). Place rod (12) aside. Remove belt (16) from alternator (1) .
Illustration 7 g00587371
Remove bolt (9) and the washer that holds alternator (1) to alternator support (10). Remove alternator (1) from alternator support (10) .