CIRCUIT BREAKER AS 1667164 - Caterpillar

Illustration 1 g03889399
Front view
Table 1
Specification for 340-3150 Material Handling Boom    
Item    Qty    Part    Specification Description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings, the fore boom, upper frame, and the cylinder pin bores.    
1     6     7X-2553 Bolt     Torque to
240 20 N m (177 15 lb ft).    
2     1     195-1861 Pin     Diameter is
109.95 0.04 mm (4.329 0.002 inch).    
3     6     8T-4956 Bolt     Torque to
100 20 N m (74 15 lb ft).    
4     1     216-2148 Pin     Diameter is
89.740 0.015 mm (3.5331 0.0006 inch).    
5     2     7X-4803 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
6     2     257-2216 Bushing     Bore before assembly is
90.31 0.04 mm (3.556 0.002 inch).
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).    
7     2     096-0854 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed.    
8     2     204-2968 Bushing     Bore before assembly is
80.25 0.02 mm (3.159 0.001 inch).
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).    
9     As required, use the following shims and spacer in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
0.8 mm (0.03 inch):    
1 133-2428 Shim     Thickness is
0.5 mm (0.02 inch).    
1 4I-0575 Shim     Thickness is
1.0 mm (0.04 inch).    
1 4I-0577 Shim     Thickness is
2.0 mm (0.08 inch).    
10     As required, use the following shims in order to adjust the minimum lateral clearance of
0.5 mm (0.02 inch) to the maximum lateral clearance of
0.8 mm (0.03 inch):    
1 133-2426 Shim     Thickness is
0.5 mm (0.02 inch).    
1 093-0084 Shim     Thickness is
1.0 mm (0.04 inch).    
1 093-0116 Shim     Thickness is
2.0 mm (0.08 inch).