CLAMP 0048720 - Caterpillar

Illustration 5 g03429676The outlet relief valve for the torque converter is fastened to the torque converter case.Reference: Refer to Systems Operation, UENR4056, "Relief Valve (Torque Converter Outlet)" for additional information.Torque Converter
Illustration 6 g03429681Torque converter is located behind the engine between the flywheel housing and the main drive shaft.Reference: Refer to Systems Operation, UENR4056, "Torque Converter" for additional information.Relief Valve (Torque Converter Inlet)
Illustration 7 g03429711Torque converter inlet relief valve is located on lubrication distribution manifold.Reference: Refer to Systems Operation, UENR4056, "Relief Valve (Torque Converter Inlet)" for additional information.Steering Differential and Brake
Illustration 8 g03429716The steering deferential and brake are located in the rear of the machine.Reference: Refer to Systems Operation, UENR4056, "Steering Differential and Brake" for additional information.Final Drive
Illustration 9 g03429736The final drive is located toward the rear of the machine.Reference: Refer to Systems Operation, UENR4056, "Final Drive" for additional information.Transmission
Illustration 10 g03429741The transmission is located in the rear of the machine. Included inside the transmission are as follows:transmission hydraulic control, transfer and bevel gears and main relief valve.Reference: Refer to Systems Operation, UENR4056, "Transmission", Systems Operation, UENR4056, "Transmission Hydraulic Control", Systems Operation, UENR4056, "Transfer and Bevel Gears", and Systems Operation, UENR4056, "Main Relief Valve" for additional information.Torque Converter Output Speed Sensor
Illustration 11 g03670760The torque converter output speed sensor is located in the rear of the torque converter housing.Reference: Refer to Systems Operation, UENR4056, "Electronic Control (Power Train System)" for additional information.Parking Brake Switch
Illustration 12 g03670763The parking brake switch is located on the left side of the operator.Reference: Refer to Systems Operation, UENR4056, "Electronic Control (Power Train System)" for additional information.Decel Pedal Position Sensor
Illustration 13 g03670770The decel pedal position sensor is located in the cab behind the decel pedal.Reference: Refer to Systems Operation, UENR4056, "Electronic Control (Power Train System)" for additional information.Service Brake Pedal Position Sensor
Illustration 14 g03670773The service brake pedal position sensor is located in the cab behind the service brake pedal.Reference: Refer to Systems Operation, UENR4056, "Electronic Control (Power Train System)" for additional information.Filter By-Pass Switch
Illustration 15 g03670781The filter by-pass switch is located in the filter housing.Reference: Refer to Systems Operation, UENR4056, "Electronic Control (Power Train System)" for additional information.