parts catalog

CLAMP 0876727 - Caterpillar

0876727 CLAMP Caterpillar parts CLAMP
Alternative (cross code) number:
Caterpillar 0876727 CLAMP

Buy CLAMP 0876727 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Start By:
Remove the radiator, hydraulic oil cooler, and fuel cooler.
Illustration 1 g06256739
Remove bolt (2), the washer, and the clamp.
Disconnect three hose assemblies (5) from gear pump (7).
Disconnect hose assembly (6) from gear pump (7). Remove the O-ring seal.
Remove two nuts (4), the two washers, the two bolts, the two washers, and bracket assembly (3).Reposition the hose assembly out of the way.
Remove two bolts (1), the two washers, gear pump (conveyor system charge) (7), and the gasket.Installation Procedure
Install gear pump (conveyor system charge) (7) in the reverse order of removal.
Purge the conveyor charge system. Refer to Special Instruction , M0072814, "Procedure to Bleed the Conveyor Charge Pump on Certain AP1000F, AP1055F, AP600F, and AP655F Asphalt Pavers" for the correct procedure.End By:
Install the radiator, hydraulic oil cooler, and fuel cooler.

Parts clamp Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.