AVSPARE.COM
parts catalog

CLAMP 0878449 - Caterpillar



0878449 CLAMP Caterpillar parts CLAMP
Rating:
76
Alternative (cross code) number:
CA0878449
087-8449
0878449
Caterpillar 0878449 CLAMP

Buy CLAMP 0878449 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 6 g03714727
Remove the bolts, the plates, cable assembly (12), and clamps (15). Place cable assembly (12) out of the way.
Remove the bolts, the plates, cable assembly (13), cable assembly (14), and clamps (16). Place cable assemblies (13) and (14) out of the way.
Illustration 7 g03714757
Remove bolts (17) and the clamp assemblies from the engine. Place cable assemblies (4), (13), and (14) out of the way.
Illustration 8 g03714761
Remove the cable straps securing harness assembly (3) to the top of the engine.
Disconnect hose assembly (18) .
Illustration 9 g03714802
Disconnect connector (19) .
Remove the cable straps securing harness assembly (3) to the side of the engine.
Illustration 10 g03714808
Disconnect hose assembly (20) .
Remove the bolts and move hose assembly (21) out of the way.
Disconnect the hose assemblies from gear pump (22) .
Remove the cable straps securing harness assembly (3) to the side of the engine.
Illustration 11 g03716447
Remove cable strap (25). Remove nut (23) and wire assembly (24) .
Loosen bolt (26) and disconnect harness assembly (27) .
Illustration 12 g03716448
Disconnect harness assembly (28) .
Illustration 13 g03716450
Remove the cable straps securing harness assembly (28) to the ladder clips.
Illustration 14 g03714883
Remove the bolts, the plate, and clamps (29). Move hose assemblies out of the way.
Remove the bolts, the plate, and clamps (30). Move harness assembly out of the way.
Illustration 15 g03714884
Loosen clamp (31) .
Illustration 16 g03714912
Remove two nuts (33), the two washers, and the U-bolt. Remove tube assembly (32) from the turbo.
Illustration 17 g03714885
Typical example of attaching a load leveler.
Attach Tooling (A) and a suitable lifting device to engine (34). The weight of engine (34) is approximately 780 kg (1720 lb).
Illustration 18 g03715201
Typical example.
Remove 12 bolts (35) from the rear of engine (34) .
Remove two bolts (36), the two washers, the two flexible mounts, and engine (34) .


Parts clamp Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.