CLAMP 1178911 - Caterpillar

Illustration 3 g02014214
Height Adjustment
(1) Weight adjustment - The seat is adjusted for the driver's weight by turning the weight adjuster lever when the seat is empty. The seat weight can be read from the indicator. The setting for the driver's weight must be checked and adjusted as necessary before the vehicle is driven. (2) Height adjustment - The seat height can be adjusted with several settings. Raise the driver seat to the required height until you hear it latch in place. When the seat is raised above the highest setting (the end stop), it will drop back down to the lowest position. (3) Forward and Backward adjustment for the operator station - To adjust the operator station forward or backward, pull up lever (3) and hold lever (3). Move the operator station to the desired position. Release lever (3) in order to lock the operator station in the selected position. (4) Forward and Backward seat adjustment - To adjust the seat forward or backward, pull up lever (4) and hold lever (4). Move the seat to the desired position. Release lever (4) in order to lock the seat in the selected position. (5) Headrest - Pull up on the headrest in order to raise the headrest. Push down on the headrest in order to lower the headrest. Adjust the angle of the headrest by pushing or pulling the headrest. (7) Seat backrest - Lift the locking lever and move the backrest forward or backward into the desired position.Comfort Seat Adjustment (If Equipped)
Illustration 4 g01590840 (1) Height and Weight adjustment - The height and weight adjustment lever is a two-position lever. Pull up on the adjustment lever (1) in order to raise the seat to the desired height and weight of the operator. Push down on the adjustment lever (1) in order to lower the seat to the desired height and weight of the operator. Continue adjusting the height and weight of the seat until the green marker is visible in the indicator (2). (3) Forward and Backward adjustment for the operator station - To adjust the operator station forward or backward, pull up lever (3) and hold lever (3). Move the operator station to the desired position. Release lever (3) in order to lock the operator station in the selected position. (4) Forward and Backward seat adjustment - To adjust the seat forward or backward, pull up lever (4) and hold lever (4). Move the seat to the desired position. Release lever (4) in order to lock the seat in the selected position. (5) Headrest - Pull up on the headrest in order to raise the headrest. Push down on the headrest in order to lower the headrest. Adjust the angle of the headrest by pushing or pulling the headrest.
Illustration 5 g01590858 (6) Seat Heater - Press the switch in order to turn on or turn off the seat heater. Press the switch to 0 in order to switch OFF the Seat heater. Press the switch to 1 in order to