1219619 CLAMP Caterpillar parts
RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
Rating:
Alternative (cross code) number:
CA1219619
121-9619
1219619
CA1219619
121-9619
1219619
Weight: 0.21 pounds 0 kg.
RECLAIMER MIXER, STABILIZER MIXER,
Compatible equipment models: 1219619:
Number on catalog scheme:
15
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85mm 1
If the engine has guards, remove the guards. Refer to the OEM for the correct procedure. Note: Mark the direction of rotation of the alternator belt, if the belt will be reused.
Illustration 1 g02433716
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85mm 1
Illustration 2 g02433716
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Clean all pulleys and guide rollers. Ensure that the pulleys and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt. Note: The grooves on the alternator belt must be located into the grooves of all pulleys.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85mm 1
If the engine has guards, remove the guards. Refer to the OEM for the correct procedure. Note: Mark the direction of rotation of the alternator belt, if the belt will be reused.
Illustration 1 g02433716
Typical example
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Remove alternator belt (1).
If necessary, Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction and remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Locking Pin
Ø 8mm by 85mm 1
Illustration 2 g02433716
Typical example
If necessary, follow Step 1.a through Step 1.c in order to position the tensioner correctly.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction.
Insert Tooling (A) into Hole (Y).
Release the pressure on the 1/2" square drive tool and remove the 1/2" square drive tool from Hole (X).
Clean all pulleys and guide rollers. Ensure that the pulleys and all guide rollers are clean. Ensure that the pulleys and guide rollers are free from dirt and build up from the old belt. Note: The grooves on the alternator belt must be located into the grooves of all pulleys.
Position alternator belt (1). Ensure that the alternator belt is centered on all pulleys. A used alternator belt should be installed in the original direction of rotation.
Install a 1/2" square drive tool into Hole (X) in tensioner (2). From the front of the engine, turn the tool in a clockwise direction. Remove Tooling (A) from Hole (Y).
Release the pressure on the 1/2" square drive tool until the alternator belt is tensioned. Remove the 1/2" square drive tool from Hole (X). Note: The tensioner should be at the nominal position.
If the engine has guards, install the guards. Refer to the OEM for the correct procedure.
Caterpillar parts catalog:
Parts clamp Caterpillar catalog:
3R2028
CLAMP
RM-250C, RM-300, RM-350B, RM-500, RR-250, RR-250B, SM-350, SS-250
RM-250C, RM-300, RM-350B, RM-500, RR-250, RR-250B, SM-350, SS-250
9C2643
CLAMP
518, 518C, RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
518, 518C, RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
1095753
CLAMP
CB-334D, CB-334E, CB-335D, CS-663E, CS-683E, PM-465, RM-350B, SM-350
CB-334D, CB-334E, CB-335D, CS-663E, CS-683E, PM-465, RM-350B, SM-350
6R3340
CLAMP
CB-334E, CB-34, CB-544, CB-634, CP-433C, CS-431C, SM-350
CB-334E, CB-34, CB-544, CB-634, CP-433C, CS-431C, SM-350
8C8271
CLAMP
AP-650B, AP-800, AP-800C, AP-800D, BG-225B, BG-225C
AP-650B, AP-800, AP-800C, AP-800D, BG-225B, BG-225C
7R6025
CLAMP-WELD PLATE
AP-1000B, AP-800C, BG-225B, BG-225C
AP-1000B, AP-800C, BG-225B, BG-225C
AP-200, CP-563, CS-563C, CS-573C, CS-583, CS-583C
1G9802
CLAMP
CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-634, CB-634C, CP-433C, CP-563, CS-431C, CS-531, CS-533, CS-563C, CS-573C, CS-583, CS-583C
CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-634, CB-634C, CP-433C, CP-563, CS-431C, CS-531, CS-533, CS-563C, CS-573C, CS-583, CS-583C
0774126
CLAMP
CP-563, CS-531C, CS-533, CS-533C, CS-551, CS-563C, CS-573C, CS-583, CS-583C, PS-300, PS-500
CP-563, CS-531C, CS-533, CS-533C, CS-551, CS-563C, CS-573C, CS-583, CS-583C, PS-300, PS-500
0777254
CLAMP
CP-433C, CP-433E, CP-563, CS-423E, CS-431C, CS-433C, CS-433E, CS-531, CS-583, RR-250
CP-433C, CP-433E, CP-563, CS-423E, CS-431C, CS-433C, CS-433E, CS-531, CS-583, RR-250
1G5679
CLAMP
CP-563, CS-531, CS-531C, CS-531D, CS-533, CS-533C, CS-533D, CS-563C, CS-573C, CS-583, CS-583C
CP-563, CS-531, CS-531C, CS-531D, CS-533, CS-533C, CS-533D, CS-563C, CS-573C, CS-583, CS-583C
1221071
CLAMP
RM-350B, SM-350
RM-350B, SM-350