CLAMP 1246419 - Caterpillar

Illustration 1 g06248986
Typical example
Table 1
Item Qty Part Specification Description
1 1 346-9380 Buffer Seal As Lubricate lightly with the lubricant that is being sealed.
2 1 346-5190 U-Cup Seal Lubricate lightly with the lubricant that is being sealed.
3 1 346-9382 Wiper Seal Lubricate lightly with the lubricant that is being sealed.
4 - - Before assembly, apply green Loctite 609 to the wiper seal groove.
5 1 3G-5022 Locknut Before assembly, lubricate the threads.
Torque to 13500 1350 N m (9957 996 lb ft).
6 1 247-4930 Piston Before assembly, lubricate the threads.
Torque to 800 80 N m (590 59 lb ft).
D1 1 - Bore is 266.70 0.10 mm (10.500 0.004 inch).
D2 1 491-5814 Rod Diameter is 177.75 0.04 mm (6.998 0.002 inch).
D3 1 247-4934 Head Bore over two lands is 178.08 0.03 mm (7.011 0.001 inch).
7 10 173-9682 Bolt Torque to 3100 350 N m (2286 258 lb ft).