CLAMP 1723645 - Caterpillar

the engine start switch to the ON position. After approximately one second, the CAT logo appears in the display and the alert indicator turns on. The coolant temperature, hydraulic oil temperature, fuel level and position of the engine speed dial are now indicated. Note: The pattern for the joystick controls is indicated in the bottom of the display for three seconds. This feature is for the Electronic Joystick System Only. The monitoring system checks the level of the engine coolant, engine oil and hydraulic oil before the engine starts. If the fluid level check detects a low fluid level, the appropriate message will be displayed and a pictograph will be shown to indicate the fluid level that is low.Note: If more than one fluid level is low, the right key symbol and the left key symbol are indicated in the bottom right area of the warning message indicator. Press the right key (9) or the left key (12) in order to check other indicated warning messages. The low fluid level indicators will disappear after five seconds when the engine is started.Note: The machine cannot perform an accurate fluid level check when the machine is on a slope. Perform the fluid level check on level ground.If the engine is started during the fluid level check, the monitor will cancel these checks. The service hours for the filters are checked first. Next the service hours for fluids are checked. If a filter or a fluid is over the recommended change interval, "CHECK FLTR/FLUID INFO" appears on the display. Refer to "MAIN MENU" for further information.