CLAMP 1W1305 - Caterpillar

Improper lifting or tiedowns can allow load to shift and can cause injury and damage.
Illustration 1 g06003304For the specifications of the machine, refer to Operation and Maintenance Manual, "Specifications".For specifications of any work tools, refer to the Operation and Maintenance Manual for the specific work tool.
Lifting Mass - The lifting mass indicates the maximum weight of the machine without any work tools and empty water tanks.
Lifting Point - To lift the machine, attach the lifting devices to the lifting points.
Tie Down Point - To tie down the machine, attach the tie-downs to the tie down points.Lifting the Machine
Use properly rated cables and properly rated slings to lift the machine.Position the crane or the lifting device to lift the machine in a level position.
Illustration 2 g06003322
Preferred lifting method
Illustration 3 g06003331
Additional lifting method
Drain the water ballast tank and water spray tank.
Move the machine into position.
Apply the parking brake.
Turn the engine start switch key to the OFF position. Remove the key.
Engage the service lock valves.
Attach lifting cables to the lifting eyes. The lifting eyes are identified on the machine by labels. There are two lifting eyes on each side of the machine.
Lift the machine slowly to make sure that the machine stays level. Move the machine to the desired position.Tying Down the Machine
Do not tie down the machine over the operator platform.
Illustration 4 g06003337
Move the machine into position.
Apply the parking brake.
Turn the engine start switch key to the OFF position. Remove the key.
Chock the front tires and the rear tires.
Use the tie-down positions to secure the machine. The tie-down positions are identified on the machine by labels. There are two tie-down positions on each side of the machine.Refer to Operation and Maintenance Manual, "Shipping the Machine" for shipping instructions.