2331566 CLAMP-BAND Caterpillar parts
561N, 953C, 963C, D5N, D6N
Rating:
Alternative (cross code) number:
CA2331566
233-1566
2331566
CA2331566
233-1566
2331566
Weight: 0.37 pounds 0 kg.
Information:
ID
0
mm
PIPELAYER, TRACK-TYPE TRACTOR,
Compatible equipment models: 2331566:
Number on catalog scheme:
13
For full view, you need register
Information:
(4WD, 2JF, 9TG, 9AW),
G3512 (4KC, 5JD, 7NJ, 6JW),
G3516 (3RC, 8LD, 4EK, 5PN, 8PW) EnginesReference: Engine News, April 1998, Page 5, "New Spark Plug Recommended For G3500 EnginesThe new 146-2588 Spark Plug, identified in the Reference Article, provides several benefits as follows:
1. The new 146-2588 Spark Plug has a 1000 ohm wire wound resistor. This allows you to check the resistance of the plug with a standard multimeter. The SAC9 type resistor spark plug (124-7380 and 149-9931) can not be resistance tested with the standard multimeter, but requires a special resistance tester.2. The new 146-2588 Spark Plug wire wound resistor is installed at the upper end of the plug, just under the threaded top connector stud. This stud has a longer stem below the threads to keep the anaerobic sealer from wicking down and contaminating the electrical interface between the stud end and the resistor. Also, with the resistor higher, it runs cooler and lasts longer.3. The glass seal that fastens the center electrode to the ceramic insulator and maintains an air tight seal is capable of withstanding higher operating temperatures. This will help keep the center electrode from breaking free and slipping up into the plug in high temperature applications.4. The combustion tip of the plug is masked during plating and will no longer have any metal salts that can burn free and form whiskers to short the center electrode to the ground strap in high combustion temperature applications. These shorts usually result in multiple shut downs which can require cleaning the plug tip to remove the whiskers.5. This new 146-2588 Spark Plug can be used in any gas engine that requires an 18 mm plug. The use of this spark plug will allow you to standardize on only one 18 mm spark plug. You will not have to think about "blue nose", "black nose", "no color nose", or whatever transformers or application. Always be sure to use a new 9Y-6792 Gasket any time a spark plug is installed. This will help get proper spark plug sealing and insure proper spark plug cooling.
G3512 (4KC, 5JD, 7NJ, 6JW),
G3516 (3RC, 8LD, 4EK, 5PN, 8PW) EnginesReference: Engine News, April 1998, Page 5, "New Spark Plug Recommended For G3500 EnginesThe new 146-2588 Spark Plug, identified in the Reference Article, provides several benefits as follows:
1. The new 146-2588 Spark Plug has a 1000 ohm wire wound resistor. This allows you to check the resistance of the plug with a standard multimeter. The SAC9 type resistor spark plug (124-7380 and 149-9931) can not be resistance tested with the standard multimeter, but requires a special resistance tester.2. The new 146-2588 Spark Plug wire wound resistor is installed at the upper end of the plug, just under the threaded top connector stud. This stud has a longer stem below the threads to keep the anaerobic sealer from wicking down and contaminating the electrical interface between the stud end and the resistor. Also, with the resistor higher, it runs cooler and lasts longer.3. The glass seal that fastens the center electrode to the ceramic insulator and maintains an air tight seal is capable of withstanding higher operating temperatures. This will help keep the center electrode from breaking free and slipping up into the plug in high temperature applications.4. The combustion tip of the plug is masked during plating and will no longer have any metal salts that can burn free and form whiskers to short the center electrode to the ground strap in high combustion temperature applications. These shorts usually result in multiple shut downs which can require cleaning the plug tip to remove the whiskers.5. This new 146-2588 Spark Plug can be used in any gas engine that requires an 18 mm plug. The use of this spark plug will allow you to standardize on only one 18 mm spark plug. You will not have to think about "blue nose", "black nose", "no color nose", or whatever transformers or application. Always be sure to use a new 9Y-6792 Gasket any time a spark plug is installed. This will help get proper spark plug sealing and insure proper spark plug cooling.
Caterpillar parts catalog:
Parts clamp Caterpillar catalog:
120H, 120H NA, 135H, 135H NA, 2384C, 2484C, 30/30, 3126B, 315C, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR,...
120H, 120H ES, 120H NA, 135H, 135H NA, 140G, 3126B, 320B, 322B LN, 322C, 322C FM, 325B L, 325C, 325C FM, 330, 330 FM L, 330B, 330B L, 35, 350, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430...
216, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 248, 24H, 24M, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B, 268B, 272C, 277C, 277C2, 277D, 279C, 279...
120H, 120M, 120M 2, 12H, 12M, 135H, 140H, 140K, 140M, 143H, 14H, 14M, 160H, 160K, 160M, 163H, 24H, 2864C, 3126, 3176B, 3176C, 3196, 320B, 325B L, 330B L, 330C, 330C L, 3406E, 3408, 3408B, 3408C, 3412,...
120G, 12G, 130G, 140G, 14G, 14M, 16G, 216, 216B, 216B3, 226B, 226B3, 228, 236, 236B, 242B, 247, 247B, 247B3, 248, 252B, 259B3, 267, 267B, 268B, 2864C, 287, 3406B, 3406C, 414E, 416, 416B, 416D, 416E, 4...
140G, 14M, 2384C, 2484C, 3126B, 3176C, 3196, 3208, 320D, 320D FM, 320D L, 320D LN, 320D2, 320D2 L, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 3...
120K, 120K 2, 12K, 140K, 140K 2, 160K, 322C, 325C, 414E, 416E, 416F, 420E, 420F, 422F, 428F, 430E, 430F, 432F, 434F, 444F, 627H, 627K LRC, 953C, 963C, 973C, 973D, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5...
120H, 120K, 120K 2, 12H, 12K, 12M, 135H, 140G, 140K, 140K 2, 140M, 140M 2, 160K, 160M, 160M 2, 3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325C, 325C FM, 325D, 325D FM, 32...
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 16M, 24H, 24M, 3508, 3508B, 3512B, 3516, 3516...
120H, 120H ES, 120H NA, 12H, 135H, 135H NA, 140H, 143H, 14H, 160H, 163H, 213B, 214B, 224B, 3114, 3116, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 613C II, BG-2455C,...
375, 814F, 815B, 815F, 816F, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 834B, 834G, 836, 836G, 910, 931, 931B, 933, 935C II, 939, 953, 953C, 980C, 980F, 988B, 992C, 992D
120H, 120H ES, 120H NA, 135H, 135H NA, 2470C, 553C, 554, 561M, 561N, 613C II, 904B, 918F, 924F, 924G, 924GZ, 924H, 928F, 928G, 928HZ, 930G, 938F, 938H, 953C, 953D, 963C, 963D, CP-56, CP-64, CP-76, CS-...
814B, 814F, 815B, 815F, 816F, 966C, 966R, 973C, 977K, 977L, D4D, D8H
2374134
CLAMP
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 16M, 24M, D3G, D3K XL, D4G, D4K XL, D5G, D5K LGP, D6K LGP, D6N, D6R II, D6R III, D6T, D7R II, D8T, D9T
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 16M, 24M, D3G, D3K XL, D4G, D4K XL, D5G, D5K LGP, D6K LGP, D6N, D6R II, D6R III, D6T, D7R II, D8T, D9T
3124178
CLAMP
572R, 572R II
572R, 572R II
1607222
CLAMP
572R, 572R II
572R, 572R II
572R, 572R II, 583K, 594H, D11R, D7H, D7R, D7R II, D8H, D8K, D8N, D9G, D9H
120K, 120K 2, 12K, 140K, 140K 2, 160K, 2470C, 525D, 535D, 545D, 553C, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938K, 953C, 953D, 963D, CP-56, CP-76, CS-56B, CS-64, CS-68B, CS-74, CS-74B, CS-78B
D3G, D3K XL, D4G, D4K XL, D5G, D5K LGP
2172706
CLAMP
D3G, D4G, D5G
D3G, D4G, D5G
D3G, D4G, D5G
2047427
CLAMP
D5N, D6N
D5N, D6N
9Y8765
CLAMP
973C
973C
2796438
CLAMP AS
973C
973C