CLAMP-BAND 2631174 - Caterpillar

Single UPS
Illustration 1 g02143224
(3) Slot for the relay communications card (4) Open slots for the optional communication cards. (6) Screw-type terminal block used for connecting the contacts and the coils of the two external battery circuit breakers "XMB07", "XMB08" (7) Screw-type terminal block used for the connection of the remote emergency power off "REPO" "XMB06".The assembly recommendations must be followed. These measures ensure the correct positioning and support of the various strands of the control and communication cables on the front face of the UPS.
Ensure sufficient isolation of power, control, and communication cables. Run the communication cables separately from the power cables. Reinforce the insulation of the control and communication cables if any risk of contact with the power cables exists. Running the cables together may cause unintentional contact with live power cables resulting in serious personal injury or death.
Separate the control and communication cables from the power cables.
Table 1
Callout     Description     Level of Insulation    
3     Relay communication card     SELV or LV    
4     Optional communication card     SELV    
6     General shutdown cable     SELV    
7     External cables for the battery circuit breaker     SELV    
Route the cables (6) and (7) together in front of the panels that are used for protection.
Attach the