CLAMP GP-HYDRAULIC LINES 2635619 - Caterpillar

Joystick
Illustration 1 g00769298
(A) Left joystick
(B) Right joystick
(1) Variable Speed - Move the thumb wheel downward in order to activate the work tool. Move the thumb wheel further in order to increase the speed of the work tool.
(2) On/Off - Push this switch in order to activate the work tool at a constant rate. Push this switch again in order to turn off the work tool.Work Tool Pedal
With certain attachment combinations, the work tool pedal can have different functions. Always check for work tool pedal function before using the work tool pedal. Improper operation of the work tool pedal could result in serious injury or death.
The work tool pedal can be located on either side of the travel pedals. The work tool pedal allows the operator to modulate the speed of the work tool.
Illustration 2 g00756717
Variable Speed - Push down on the front of the pedal in order to activate the work tool. Move the pedal further in order to increase the speed of the work tool. Release the pedal in order to turn off the work tool.
Illustration 3 g00291764
(1) Lock pin
(A) UNLOCKED position
(B) LOCKED position When you are not using the work tool, put the lock pin (1) in LOCKED position (B). This will lock the work tool pedal in order to prevent any unexpected operation of the work tool.
Illustration 4 g00291805
(1) Lock pin
(2) Pin
(3) Notch Note: To prevent lock pin (1) from being accidentally pulled out, insert pin (2) through notch (3) and turn lock pin (1) counterclockwise by 1/4 turn.Foot Switch
Illustration 5 g02368316Hydraulic Hammer ON - Push down on the foot switch in order to activate the hydraulic hammer.Hydraulic Hammer OFF - Release the switch in order to deactivate the hydraulic hammer.