2637038 CLAMP GP-HYDRAULIC LINES Caterpillar parts
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH
Rating:
Alternative (cross code) number:
CA2637038
263-7038
2637038
CA2637038
263-7038
2637038
WHEELED EXCAVATOR,
Compatible equipment models: 2637038:
Number on catalog scheme:
14
For full view, you need register
Information:
the jumper installed. - Proceed to Test Step 6.Test Step 5. Create a Short Circuit at the ECM Connector
Turn the keyswitch to the OFF position.
Disconnect the P2 connector from the ECM.Thoroughly inspect the P2/J2 connectors for damage and/or corrosion. Repair if necessary.
Fabricate a jumper wire and install the jumper wire between J2:15 and J2:60.
Turn the keyswitch to the ON position.
Use the electronic service tool to check for an active 1076 diagnostic code. Wait at least 30 seconds for activation of the diagnostic codes.
Turn the keyswitch to the OFF position.
Remove the jumper wire.
Reconnect the connectors.Results:
A 1076-5 diagnostic code was active before installing the jumper. A 1076-6 diagnostic code is active with the jumper installed. - The fault is in the harness between the 62-pin connector and the ECM.Repair:
Turn the keyswitch to the OFF position.
Disconnect the P2 connector from the ECM.Thoroughly inspect the P2/J2 connectors for damage and/or corrosion. Repair if necessary.
Fabricate a jumper wire and install the jumper wire between J2:15 and J2:60.
Turn the keyswitch to the ON position.
Use the electronic service tool to check for an active 1076 diagnostic code. Wait at least 30 seconds for activation of the diagnostic codes.
Turn the keyswitch to the OFF position.
Remove the jumper wire.
Reconnect the connectors.Results:
A 1076-5 diagnostic code was active before installing the jumper. A 1076-6 diagnostic code is active with the jumper installed. - The fault is in the harness between the 62-pin connector and the ECM.Repair:
Cat SIS web machinery list:
Parts clamp Caterpillar catalog:
2637058
CLAMP GP-HYDRAULIC LINES
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
2637116
CLAMP GP-HYDRAULIC LINES
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
3142886
CLAMP AS
M313D, M315D, M316D, M317D 2, M318D, M322D
M313D, M315D, M316D, M317D 2, M318D, M322D
2643541
CLAMP
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
312D, 315D L, 319D, 323D L, 323D LN, 324D, 324D L, 324D LN, 325D, 325D L, 329D L, 330D, 330D L, 330D LN, 336D L, 345C, 345C L, 517, 527, 769C, 771C, 772B, 773B, 775B, 776C, 777, 777B, 784B, 785B, 789B...
3330119
CLAMP
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
3176605
CLAMP AS
M315D, M316D, M317D 2
M315D, M316D, M317D 2
2820591
CLAMP-BAND
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH, M330D
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH, M330D
M315D, M316D
2993656
CLAMP
M316D
M316D
2765278
CLAMP GP-HYDRAULIC LINES
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH