3243528 CLAMP-HOSE Caterpillar parts
3.4B IOPU, 3054C, 3054E, 3056E, C3.4B, C4.4, C4.4XQ80, C6.6, C7.1
Rating:
Alternative (cross code) number:
CA3243528
324-3528
3243528
CA3243528
324-3528
3243528
Weight: 0.09 pounds 0 kg.
GENERATOR SET, PACKAGE,
Compatible equipment models: 3243528:
Number on catalog scheme:
5
For full view, you need register
Information:
Machine Dimensions
Illustration 1 shows the dimensions of the machine that will need to be obtained in order for the AccuGrade system to operate correctly.Refer to the Testing and Adjusting, "Machine Dimensions - Configure" section of this manual for additional information on measuring the dimensions of the machine.
Illustration 1 g01113705
(A) Top of the lower housing height above right cutting edge bolt (B) Top of lower housing height above left cutting edge bolts (C) The distance that the receiver is back from the right bolts of the cutting edge. (D) The distance the receiver is back from left bolts of the cutting edge (E) Distance the GPS receiver is in from right blade tip (F) Distance the GPS receiver is in from left blade tip (G) Blade height (H) Blade width
You must enter correct dimensions. Any errors will transfer directly into the finished surface.
Note: Caterpillar recommends that you use the receiver measure up tool. If the measure up tool is not available, the height measurements should be made to the top of the lower housing on the GPS receiver. Measure both the left and the right GPS receivers.
Different offsets will be applied to the measured machine dimensions, depending on what option is selected in the "Measure height to" field. Selecting the wrong "Measure height to" option will introduce a vertical error of 73 mm (2.87 inch)
Illustration 1 shows the dimensions of the machine that will need to be obtained in order for the AccuGrade system to operate correctly.Refer to the Testing and Adjusting, "Machine Dimensions - Configure" section of this manual for additional information on measuring the dimensions of the machine.
Illustration 1 g01113705
(A) Top of the lower housing height above right cutting edge bolt (B) Top of lower housing height above left cutting edge bolts (C) The distance that the receiver is back from the right bolts of the cutting edge. (D) The distance the receiver is back from left bolts of the cutting edge (E) Distance the GPS receiver is in from right blade tip (F) Distance the GPS receiver is in from left blade tip (G) Blade height (H) Blade width
You must enter correct dimensions. Any errors will transfer directly into the finished surface.
Note: Caterpillar recommends that you use the receiver measure up tool. If the measure up tool is not available, the height measurements should be made to the top of the lower housing on the GPS receiver. Measure both the left and the right GPS receivers.
Different offsets will be applied to the measured machine dimensions, depending on what option is selected in the "Measure height to" field. Selecting the wrong "Measure height to" option will introduce a vertical error of 73 mm (2.87 inch)
Cat SIS web machinery list:
Parts clamp Caterpillar catalog:
120G, 120H, 120M 2, 12G, 12H, 12H ES, 12H NA, 12M 2, 130G, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 143H, 14G, 14H NA, 14M, 153, 160G, 160H, 160H ES, 160H NA, 160M, 160M 2, 163, 163H NA,...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 1290T, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 1390, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 14M, 153, 160G, 160H, 160H ES, 160H N...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 1...
120B, 120G, 12G, 130G, 140B, 140G, 143H, 14G, 160G, 160H, 16G, 173B, 183B, 215, 215D, 219D, 225, 229, 229D, 231D, 235, 235B, 235C, 245, 245B, 2470C, 2570C, 2670C, 2864C, 3054C, 3054E, 3056E, 307C, 307...
225, 229, 236B, 236B3, 236D, 242B3, 242D, 246C, 246D, 252B, 252B3, 256C, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289...
212, 3054, 3054B, 3054C, 3056, 307, 312, 312B L, 315, 315B L, 317, 416B, 416C, 426B, 426C, 428B, 428C, 436C, 438B, 438C, 908, 914G, AP-1200, AP-800, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544...
1090, 1190, 1190T, 120G, 120H, 120M, 120M 2, 1290T, 12F, 12G, 12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 1390, 140, 140G, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14E, 14G, 14H, 14M, 16, 160H...
12F, 183B, 225, 3003, 3013, 3013C, 3014, 3024, 3024C, 3054, 3054C, 3054E, 307, 308C, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 322 FM L, 330, 330 L, 3304, 3306, 35, 350, 375, 375 L, 416, 416B, 416...
120M, 12M, 140M, 14M, 160M, 16M, 3054C, 312B L, 312C, 315B L, 320B, 322B L, 322B LN, 325B L, 325C FM, 325D FM LL, 330B L, 330C FM, 330D FM, 3456, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 385B...
216, 228, 236, 247, 248, 267, 287, 3054C, 3054E, 3056E, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442D, 442E, 444E, ...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 420E, 430E, 450E, 553C, 559, 613G, 914G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4...
2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 511, 521, 522, 525D, 532, 535D, 541, 545D, 551, 552, 553C, 555D, 563C, 573C, 631D, 631G, 637G, 657E, 769C, 769D, 771D, 773F, 775F, 777F, 793D, 844H, ...
3854584
CLAMP AS-TURBINE
C18, C32
C18, C32
2620491
CLAMP
773G, 773G OEM, 775G, 775G OEM, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793C, 793D, C1.5, C13, C13 XQ350, C18, C2.2, C27, C3.3, C32, C4.4, C6.6, C9.3
773G, 773G OEM, 775G, 775G OEM, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793C, 793D, C1.5, C13, C13 XQ350, C18, C2.2, C27, C3.3, C32, C4.4, C6.6, C9.3
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 2864C, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 3406B, 3406C, 3406E, 3456, 349E, 349E L, 349E L HVG, 349E L VG, 374F L...
5M6193
CLAMP-TUBE
571G, 572G, 578, 583R, 587R, 955L, C18, D7G, D7G2
571G, 572G, 578, 583R, 587R, 955L, C18, D7G, D7G2
3217868
CLAMP
C18
C18
3263271
CLAMP
C6.6
C6.6
3263270
CLAMP
C6.6
C6.6
2779603
CLAMP
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-6...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-6...
2779602
CLAMP
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-6...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 553C, 559, 613G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-6...
3267519
CLAMP-HOSE
C6.6
C6.6
2470C, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 553C, 559, 613G, 938H, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, C7.1, CP-56, CP-64, CP-76, CS-56, CS-56B, CS-64, CS-...