CLAMP-BAND 3737622 - Caterpillar

Illustration 1 g01434836
(1) Apply 5P-3413 Pipe Sealant to the threads of the bolt. (2) Install the two lip type seals so that the lip type seals are flush with the face of the bearing cage. (3) Lightly lubricate the bore of the three O-ring seals with the lubricant that is being sealed. (4) Apply 150 mL (5.1 oz) of 6V-6640 Sealant in a continuous bead at a diameter of 3.0 0.5 mm (0.12 0.02 inch). Spread the bead with a roller on the surface of the transfer case before installation of the transfer gear cover. (5) Torque for the two bolts ... 475 50 N m (350 37 lb ft) (6) Lightly lubricate the bore of the seal with the lubricant that is being sealed.Note: Apply 5P-3413 Pipe Sealant to the threads of the ecology drain group. (D) Installation depth of the ecology drain group in the transfer gear case group ... 20.3 0.3 mm (0.80 0.01 inch) (7) Torque for the ecology drain group ... 100 10 N m (75 7 lb ft)
Illustration 2 g01434837
Section B-B (8) Lightly lubricate the bore of the O-ring seal with the lubricant that is being sealed.
Illustration 3 g01434838
Section C-C (9) Apply 5 mL (0.2 oz) of 6V-6640 Sealant in a continuous bead at a diameter of 3.0 0.5 mm (0.12 0.02 inch). Spread the bead with a roller on the surface of the transfer case before installation of the bearing cage.