CLAMP AS 4826710 - Caterpillar

Illustration 1 g01603538
Rotation ... BidirectionalMaximum displacement per revolution ... 107 cc (6.5 in3)Minimum displacement per revolution ... 27 cc (1.6 in3)Maximum continuous pressure ... 40000 kPa (5800 psi)Maximum intermittent pressure ... 45000 kPa (6550 psi)Maximum speed at maximum displacement ... 3650 rpmStart of stroke ... 500 mAFull destroke per revolution Amperage ... 1500 mA Displacement ... 27 cc (1.6 in3)
Illustration 2 g01603553
Section A-A (1) Port for flushing (2) Port for the speed sensor (4) Port for case drain (3) Torque for eight bolts ... 87 5 N m (65 4 lb ft) (5) As required, use the following shims in order to obtain clearance when the rotating group is installed in the housing: 124-9932 Shim Quantity ... 1 Thickness of the shim ... 3.50 mm (0.138 inch) 124-9933 Shim Quantity ... 1 Thickness of the shim ... 3.60 mm (0.142 inch) 124-9934 Shim Quantity ... 1 Thickness of the shim ... 3.70 mm (0.146 inch) 124-9935 Shim Quantity ... 1 Thickness of the shim ... 3.80 mm (0.150 inch) 124-9936 Shim Quantity ... 1 Thickness of the shim ... 3.90 mm (0.154 inch) 124-9937 Shim Quantity ... 1 Thickness of the shim ... 4.00 mm (0.158 inch)
Illustration 3 g01603554
View of area BMotor control valve group (6) 269-4669 Solenoid As Installation torque for the solenoid assembly ... 19 N m (170 lb in) Operating voltage ... 12/24 VDC Coil resistance at 20 °C (68 °F) ... 4.26 Ohms (7) Torque for the cap ... 5 N m (45 lb in) (8) Torque for four bolts ... 22 3 N m (195 27 lb in) (9) Torque for the O-ring plug ... 25 2 N m (220 18 lb in)
Illustration 4 g01603556
View of area CFlushing valve group (10) Torque for four bolts ... 75 5 N m (55 4 lb ft)