CLAMP AS 5110246 - Caterpillar

Illustration 25 g02977585
Remove bolts (47). Repeat for the other side. Remove panel (48).
Illustration 26 g02977591
Illustration 27 g02973460
Disconnect eight hose assemblies (50) from the top of bank valve (51) for the hoe. Disconnect six harness assemblies (49) from the top of bank valve (51) for the hoe. Disconnect four hose assemblies (52) from the side of bank valve (51) for the hoe.
Disconnect harness assemblies (53). Mechanical Control
Illustration 28 g02989437
Disconnect link (54). Remove bolts (55) and pedal assembly (56). Repeat on the opposite side.
Illustration 29 g02977594
Disconnect clip (58). Disconnect five hose assemblies (57) from the side of bank valve. Disconnect hose assemblies (59) for the loader. Disconnect hose assemblies (60).
Illustration 30 g02989439
Disconnect clips (61). Remove rod assemblies (62) from bank valve (51). Remove bolts (63) and the bracket assembly.
Illustration 31 g02977598
Remove bolt (66) and loosen nuts (65). Disconnect cable assembly (64).
Illustration 32 g02977640
Illustration 33 g02977644
Remove bolts (68) and bolts (69) from panel (67).
Illustration 34 g02977658
Lift panel (67) and disconnect harness assembly (70). Remove panel (67).
Repeat for the other side.
Illustration 35 g02977660
Attach Tooling (A), Tooling (B), Tooling (C), and a suitable lifting device to cab (71). The weight of cab (71 ) is approximately 907 kg (2000 lb).
Illustration 36 g02977664
Illustration 37 g02977665
Remove cap (72). Repeat for the other side.
Remove bolt (73). Repeat for the other side.
Illustration 38 g02977667
Remove bolt (74). Repeat for the other side.
Illustration 39 g02977678
Use Tooling (A), Tooling (B), Tooling (C), and the suitable lifting device to remove cab (71).