CLAMP & MOUNTING GP 5301682 - Caterpillar

5301682 CLAMP & MOUNTING GP Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5301682
530-1682
5301682

Buy CLAMP & MOUNTING GP 5301682 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 5301682 Parts scheme CLAMP & MOUNTING GP

For full view, you need register

Information:

Illustration 7 g06223012
Illustration 8 g06223016
Side cutaway view shown for clarification. Components can only be removed through the access door.
Remove pins (9). Using a suitable lifting device, remove assemblies (10) and (11). The individual weight of frame assemblies (10), and (11), is approximately 19 kg (43 lb).
Illustration 9 g06223039
Side cutaway view shown for clarification.
Repeat Steps 6 through 10 for Locations (Y), and (Z) to remove the remaining layers of the catalyst.Installation Procedure
Illustration 10 g06223040
Illustration 11 g06223045
Illustration 12 g06223047
Illustration 13 g06223050
Side cutaway view shown for clarification.
Beginning at Location (Z), use a suitable lifting device to lower frame assembly (10) into position. Next, use a suitable lifting device to lower frame assembly (11) into the reactor assembly. The individual weight of frame assemblies (10), and (11), is approximately 19 kg (43 lb). Connect frame assemblies (10) and (11). Install pins (9).
Illustration 14 g06223052
Side cutaway view shown for clarification.
Position brackets (8) and install pins (7). Repeat for the remaining brackets.
Illustration 15 g06223055
Side cutaway view shown for clarification. Components can only be installed through the access door.
Install the individual blocks of catalyst (6) beginning in the corners and then around the perimeter, working in towards the center. The weight of the individual blocks of catalyst (6) is approximately 21 kg (47 lb).
Illustration 16 g06222992
Side cutaway view shown for clarification.
Install braces (5).
Illustration 17 g06222985
Side cutaway view shown for clarification.
Install channels (4) and install pins (3).
Illustration 18 g06223040
Side cutaway view shown for clarification.
Repeat Step 1 through 5 for Locations (Y) and (X) to install the remaining layers of catalyst.
Illustration 19 g06222982
Apply Tooling (B) to bolts (1).
If necessary, install a new gasket .Using two people, position cover (2) onto Tooling (A). The weight of cover (2) is approximately 27 kg (60lb). Install bolts (1). Remove Tooling (A) and install remaining bolts (1).