CLAMP 5371440 - Caterpillar

Illustration 1 g01109301
Power Train Oil Cooler (1) Coolant Inlet (2) Coolant Outlet (3) Oil Inlet (4) Oil OutletThe power train oil cooler is located on the right side of the engine. The cooler is an oil to water type cooler.Power train system oil with a high temperature comes from the torque converter outlet relief valve. The oil enters the cooler at oil inlet (3). The oil flows around the many tubes inside the cooler.Engine coolant enters the cooler through cooler inlet (1). As the coolant flows through the tubes inside the cooler, the coolant absorbs the heat from the oil. Coolant leaves the cooler through coolant outlet (2). The coolant is then cooled by the cooling system of the engine.After the power train oil flows around the tubes in the cooler, the oil flows out of oil outlet (4). The oil has a lower temperature. The oil then flows to the distribution manifold on the front of the bevel gear case. The manifold divides the flow between the transmission and the brakes for lubrication and cooling.