CLAMP-HOSE 5P0600 - Caterpillar

Table 1
Specifications    
Regulator
Characteristics     Regulation     Less than 1% of voltage setpoint from no load to full load    
Response time Maximum of 4 milliseconds    
Voltage drift Less than 1% steady state    
Temperature drift Less than 1% for any 40 °C (104.0 °F) change over the operating temperature range    
Sensing voltage True RMS three-phase sensing is standard. Single phase sensing is available. The variable sensing range is 180 to 280 VAC for 50 or 60 Hz.    
Stability The regulator responds to the main component of the sensed voltage and remains stable for total harmonic distortion of the generator output voltage waveform, up to 20%.    
Regulation     Volts/Hz characteristic     The characteristic is linearly proportional to frequency. 1 V/Hz characteristic can be selected by placing the jumper between terminals 6A and 8. 2 V/Hz characteristic can be selected by removing the jumper between terminals 6A and 8. These characteristics provide matched engine/generator performance for improved block load performance.    
Knee frequency The knee frequency is adjustable from 45 Hz to 65 Hz. Refer to the Testing and Adjusting, "Knee Frequency - Adjust" for more information.    
Adjustment
Characteristics     Voltage adjust range     +10% to -25% of regulator sensing voltage    
Reactive droop adjustment Adjustable from 0 to 10% at rated input current and 0.8 power factor. Either a 1 Ampere current transformer (CT) or a 5 Amperes CT can be used with a VA<1.0.    
External Voltage Adjust Potentiometer 10 K Ohm, 2 Watts    
Protection     For Overexcitation     The protection shuts off the generator output when excitation current exceeds normal operating currents for 30 seconds at 90 VDC 5%.    
Power Characteristics     Power dissipation     Maximum 50 watts at rated output    
Input 180 to 280 VAC, single-phase or three-phase on 50 Hz or 60 Hz applications
90 to 120 VAC, three-phase, on 100 Hz to 240 Hz permanent magnet (PMG) applications. Maximum of 3125 VA.
240 VAC, single-phase, on 100 Hz to 240 Hz permanent magnet (PMG) applications. Maximum of 3125 VA.    
Output
(with a 240 VAC Input) 12 Amperes DC at 65 VDC maximum continuous
25 Amperes DC at 125 VDC forcing for 10 seconds    
Turn On Voltage Approximately 6 VDC    
Temperature
Range     Ambient operating    
−40 °C (−40 °F) to
+70 °C (+ 158 °F).    
Storage
−40 °C (−40 °F) to
+70 °C (+ 158 °F).    
Physical
Specifications     Weight    
1.1 kg (2.4 lb).    
Shock Withstands up to 20 g's.    
Vibration Withstands 0.5 g's at frequencies between 18 and 2000 Hz in three mutually perpendicular planes.    
Conformity     Electromagnetic compatibility     Meets 89/336/EEC Electromagnetic Compatibility Directive.
Contains internal EMI suppression filter.    
UL UL 508 Listed    
CSA Certified per Standard CAN/CSA-C22.2 No. 14-95, CSA File No. LR 23131    
CE Conforms to the following standards:
Radiated Emissions EN50081-2
Radiated Immunity (electric field) EN61000-4-3 (10 V/m)
Radiated Immunity (conducted) EN61000-4-6 (10 VRMS)
Conducted Emissions EN50081-2 (EN55011, Class A)
ESD Immunity EN50082-2 (4 KV contact, 8 KV air)
EFT Immunity EN50082-2 (2