7Y1838 CLAMP Caterpillar parts
330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 375, 375 L, 5080, 824G, 825G, 826G, 966G, 972G, 980G
Rating:
Alternative (cross code) number:
CA7Y1838
7Y-1838
7Y1838
CA7Y1838
7Y-1838
7Y1838
Weight: 1 pounds 0 kg.
Information:
MOUNTING HOLE TO AXIS
101.6
mm
THICKNESS
6
mm
EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 7Y1838:
Number on catalog scheme:
5
For full view, you need register
Information:
Illustration 1 g00585386
Install the return spring (15) into the solenoid (2) .
Illustration 2 g00585389
Install the rollers (14) and the retainer (13) into the drive end housing (4) .
Illustration 3 g00585386
Put the idler gear (12) and the armature reduction gear (11) onto the drive end housing (4) .
Illustration 4 g00585348
Put the steel ball (10) into the overrunning clutch (9) .
Illustration 5 g00585337
Put the overrunning clutch (9) into the drive end housing (4) .
Illustration 6 g00585327
Put the drive end housing (4) on the solenoid (2) and install the screws. Tighten the screws to a torque of 0.6 N m (5.3 lb in) to 0.9 N m (7.9 lb in).
Illustration 7 g00585312
Put the armature (8) into the case of the starting motor (3) .
Illustration 8 g00585753
Put the brush holder (7) in position over the commutator. Put the positive brushes, which are connected to motor case (3) into the positive holders. The positive holder is separated from the plate by an insulator. Put the negative brushes into the negative uninsulated holders. The negative brushes are connected to brush holder (7) .
Illustration 9 g00585304
Make sure that the wires for the positive brush lead are not grounded. Put the brush springs (5) on top of the brushes (6) with a pair of long nose pliers. Make sure that the brush holder (7) and the commutator are free of oil.
Illustration 10 g00586185
If the motor case has an end frame (16), install the end frame onto the case of the starting motor. Tab (22) that is on the end frame must line up with the lead wire grommet (23) that is on the case of the starting motor.
Illustration 11 g00586190
Put the case of the starting motor (3) in position onto the solenoid (2). Engage the TAB (22) on the case of the starting motor with the notch in the solenoid. Install the through bolts and tighten the through bolts to a torque of 1.5 N m (13 lb in) to 2.4 N m (21 lb in).
Illustration 12 g00585273
Connect the lead wire (1) to the motor terminal of the solenoid (2) .Install the starting motor onto the machine.
Cat SIS web machinery list:
Parts clamp Caterpillar catalog:
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 16H NA, 16M, 24H, 24M, 3508, 3508B, 3512B, 3516, 3516...
120G, 140G, 14G, 16, 227, 330D, 3406, 572G, 621, 621E, 623, 627, 627E, 627F, 627G, 637E, 637G, 814B, 815B, 966C, 966D, 966F, 977L, 980, 983, C7.1, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HT...
3408, 589, 980G, D10N, D10R, D8L, D9L, D9N, D9R
120K, 120K 2, 12K, 12M, 140K, 140K 2, 140M, 160K, 160M, 330D L, 330D LN, 345C, 345C MH, 525C, 525D, 535C, 535D, 545C, 545D, 555D, 815B, 844, 844H, 950H, 962H, 990 II, 990H, C27, C32, IT62H, TH48-E70
16M, 24M, 2864C, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345B II, 345B II MH, 586C, 814F II, 815F II, 816F II, ...
315C, 315D L, 318C, 319C, 320 L, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E L...
215, 215B, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 336D, 615, 615C, 621G, 621H, 621K, 623E, 623F, 623G, 623H, 623K, 623K LRC, 627G, 627H, 627K, 627K LRC, 789, 789B, 7...
16H NA, 578, 583R, 583T, 587R, 587T, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 627G, 637E, 637G, 824C, 824G, 824G II, 825G, 825G II, 826G, 826G II, 980G, 980G II, D6R, D7H, D7R, D8N, D8R, D8R II, D8T,...
375, 814F, 815B, 815F, 816F, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 834B, 834G, 836, 836G, 910, 931, 931B, 933, 935C II, 939, 953, 953C, 980C, 980F, 988B, 992C, 992D
330C, 330C L, 330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L, 980C, D5R LGP, D6N, D8R, D8T, M330D, RM-300
657, 69D, 972G, 972G II, AD45B, AD55, D8H
350, 350 L, 365B, 365B II, 365C, 375, 375 L, 385B, 385C, 385C FS, 385C L, 5080, 5090B, 5110B, 988G, 988H, 988K, 992G, 992K, 993K
4E1102
CLAMP AS
966F, 966F II
966F, 966F II
844, 844H, 844K, 990, 990 II, 990H
4E8829
CLAMP AS
990, 990 II, 992G, 994D
990, 990 II, 992G, 994D
844, 844H, 844K, 990, 990 II, 990H, 990K
9U1477
CLAMP AS
844, 990, 990 II
844, 990, 990 II
4P8763
CLAMP-MOUNTING BLOCK
844, 990, 990 II
844, 990, 990 II
1685037
CLAMP
950G, 962G
950G, 962G
1746457
CLAMP AS
950G, 950G II, 962G, 962G II
950G, 950G II, 962G, 962G II
1357896
CLAMP AS
844H, 854G, 854K, 990H, 992G, 992K
844H, 854G, 854K, 990H, 992G, 992K
834G, 834H, 844, 854G, 854K, 966D, 988G, 988H, 990 II, 992G, 992K, 993K
2125819
CLAMP AS
980G, 980G II, 980K, 990H
980G, 980G II, 980K, 990H
2125818
CLAMP AS
980G, 980G II, 980K, 990H
980G, 980G II, 980K, 990H