8M0280 CLAMP Caterpillar parts
16, 65, 651E, 657E, 950B, 950B/950E, 980
Rating:
Alternative (cross code) number:
CA8M0280
8M-0280
8M0280
CA8M0280
8M-0280
8M0280
Weight: 2 pounds 0 kg.
Information:
MOUNTING HOLE TO AXIS
88.93
mm
THICKNESS
6
mm
CHALLENGER, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$11.45
22 Mar 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar CLAMP 8M0280 New
$11.80
07 May 2022
2.0943[0.94] Pounds
US: ProperBuy
8M0280 Clamp Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 8M0280:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01057511
Align bearings (11) in the body of the engine oil pump. Align the joints of the bearings to 45 15 degrees from the centerline of the bearing bores.
Use Tooling (A) in order to install bearings (11). The bearings must be 1.5 0.5 mm (0.06 0.02 inch) below the gear bore. Measure the inside diameter of the bearings after installation. The inside diameter of the bearings must be 31.811 0.013 mm (1.2524 0.0005 inch) after installation. Machine the bearing, if necessary.
Illustration 2 g00591963
Install shaft assemblies (10) in body (9).
Illustration 3 g01057514
Ensure that dowels (12) are installed in cover assembly (7) at a distance of 6.0 0.5 mm (0.24 0.02 inch) above the surface of the cover.
Use Tooling (A) in order to install bearings (8) in cover assembly (7) with the bearing joints in the correct position.
Illustration 4 g00591936
Place cover assembly (7) into position and install the bolts.
Illustration 5 g00591932
Ensure that the two pins in cover assembly (6) are installed at a distance of 6.0 1.0 mm (0.24 0.04 inch) above the surface of the cover. Install cover assembly (6).
Illustration 6 g01005318
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place clean engine oil on valve spool (5). Install valve spool (5), spring (4), gasket (3), cover (2), and the bolts.
Illustration 7 g01005273
Install the gasket and adapter (1). Note: Refer to Specifications, "Engine Oil Pump" for more information.End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01057511
Align bearings (11) in the body of the engine oil pump. Align the joints of the bearings to 45 15 degrees from the centerline of the bearing bores.
Use Tooling (A) in order to install bearings (11). The bearings must be 1.5 0.5 mm (0.06 0.02 inch) below the gear bore. Measure the inside diameter of the bearings after installation. The inside diameter of the bearings must be 31.811 0.013 mm (1.2524 0.0005 inch) after installation. Machine the bearing, if necessary.
Illustration 2 g00591963
Install shaft assemblies (10) in body (9).
Illustration 3 g01057514
Ensure that dowels (12) are installed in cover assembly (7) at a distance of 6.0 0.5 mm (0.24 0.02 inch) above the surface of the cover.
Use Tooling (A) in order to install bearings (8) in cover assembly (7) with the bearing joints in the correct position.
Illustration 4 g00591936
Place cover assembly (7) into position and install the bolts.
Illustration 5 g00591932
Ensure that the two pins in cover assembly (6) are installed at a distance of 6.0 1.0 mm (0.24 0.04 inch) above the surface of the cover. Install cover assembly (6).
Illustration 6 g01005318
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Place clean engine oil on valve spool (5). Install valve spool (5), spring (4), gasket (3), cover (2), and the bolts.
Illustration 7 g01005273
Install the gasket and adapter (1). Note: Refer to Specifications, "Engine Oil Pump" for more information.End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar parts catalog:
Parts clamp Caterpillar catalog:
12E, 1673, 1673B, 1676, 621, 824, 955H, 977H, 980, D330A, D333A, D333B, D336, D342, D342C, D353C, D379, D379A, D398, D398A, G3306, G3306B, G342C, G353D, G379, G398, G399
16, 183B, 621, 623, 631C, 633C, 637, 657, 657B, 769, 814, 824B, 834, 980, 980B, 983, 988, D342C, D9G
3408, 3412, 3412C, 3508B, 3512B, 3516B, 589, 631E, 633E II, 637D, 637E, 639D, 651E, 657E, 768C, 769C, 773B, 988B, 988F, D10N, D10R, D8L, D9L, D9N, D9R, PR-450, PR-450C, SCT673, SPS342, SPT342
24H, 3126B, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 5130, 5130B, 5230, 5230B, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 641B, 650B, 651E, 657B, 657E, 657G, 772, 773, 824H, 825H, 826H, ...
120H, 120M, 120M 2, 12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 3508C, 3512B, 3512C, 3516B, 3516C, 621G, 621H, 621K, 623G, 62...
24M, 613G, 621B, 621G, 621H, 621K, 623G, 623H, 623K, 627F, 627G, 627H, 627K, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 657E, 657G, 735, 735B, 740, 740B, 789D, 793D, 938G II, 938H, 950G II, 950H, 96...
120G, 140G, 14G, 16, 227, 330D, 3406, 572G, 621, 621E, 623, 627, 627E, 627F, 627G, 637E, 637G, 814B, 815B, 966C, 966D, 966F, 977L, 980, 983, C7.1, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HT...
120H, 120K, 120K 2, 120M, 12H, 12K, 12M, 135H, 140G, 140H, 140K, 140K 2, 140M, 143H, 14M, 160H, 160K, 160M, 163H, 16M, 24H, 611, 613G, 615C, 627G, 637G, 657E, 657G, 725, 725C, 730, 730C, 735, 735B, 74...
120G, 12F, 12G, 140B, 225D, 320 L, 320B, 320D, 320D GC, 320D L, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 24H, 2590, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 551, 552, 552 2, 584, 613G, 651B, 651E, 657E, 773F, 775F, 797B, 824C, 824G II, 825G II, 8...
24H, 5130, 5130B, 589, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, AD55, D10N, D10R, D11N, D11R, D8L, D9L, D9N, D9R, PM-200, PM-201, PM-565, PM-565B
120, 120B, 12E, 12F, 140, 140B, 14E, 16, 528, 528B, 530B, 621, 621E, 621R, 623, 631C, 641B, 772, 814, 815, 834G, 834H, 836G, 836H, 844, 844H, 844K, 854G, 854K, 910, 918F, 920, 924F, 930, 930R, 931B, 9...
428, AP-650B, AP-800D, CB-534B, CB-534C, CB-535B, CP-433B, CP-433C, CP-433E, CS-323C, CS-431C, CS-433C
7W5998
CLAMP
428, CS-323C, IT18B, IT28B
428, CS-323C, IT18B, IT28B
8C9707
CLAMP
65
65
120M, 12M, 140M, 14M, 160M, 16M, 3114, 3116, 330, 330 FM L, 330 L, 3512, 3516, 426, 725, 730, 735, 740, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F, D6M, G3406, IT12
140, 153, 215, 215B, 215C, 215D, 225, 374F L, 390F L, 517, 527, 572R II, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 65, 770G, 770G OEM, 772G, 772G OEM, 777, 814S, 824C, 825C, 826C, 834B, 988B, 992, B...
0897889
CLAMP
3412C, 3508B, 3512B, 3516B, C2.2, C3.3, C4.4, RT100, RT50
3412C, 3508B, 3512B, 3516B, C2.2, C3.3, C4.4, RT100, RT50
7N4520
CLAMP
1673C, 3306, 3306C
1673C, 3306, 3306C
14M, 16M, 24M, 3176B, 3408, 3408C, 3408E, 3412, 3412C, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3606, 3608, 3612, 3616, 365B, 365B II,...
9R6216
CLAMP AS
428
428
9R6215
CLAMP AS
428
428