CLAMP ASSEM. 9L8134 - Caterpillar

Straight Forward Operation
Illustration 6 g00281018
Straight Forward Operation
Typical Illustration
(5) Side gear
(6) Driven clutch
(11) Driven clutch
(12) Side gear
(17) Spider assembly
(22) Teeth of the spider
(23) Teeth of the driven clutchesWhen the machine has straight forward movement, teeth (22) on both sides of spider assembly (17) are fully engaged with teeth (23) of driven clutches (6) and (11). The following combination forces the differential together. The reverse angle of the teeth on the clutches and on the spider, the force of springs (7) and (10), cams (21) and center cam (15). This action forces the engagement of the teeth of the clutches with the teeth of the spider.In this condition, driven clutches (6) and (11) are fully engaged with spider assembly (17). The driven clutches turn side gears (5) and (12) at the same speed as the bevel gear. The two side gears turn the axle shafts and the wheels at the same speed as the bevel gear.Forward Turn with Power
Illustration 7 g00281019
Forward Right Turn with Power
Typical Illustration
(5) Side gear
(6) Driven clutch
(11) Driven clutch
(12) Side gear
(17) Spider assemblyDuring a turn, the outside wheel travels a longer distance than the inside wheel. When the machine turns with power, the NoSPIN differential allows the outside wheel to turn faster than the speed of the bevel gear. The NoSPIN differential does not allow the inside wheel to turn at a rate that is slower than the speed of the bevel gear. The inside wheel turns at the same speed as the bevel gear.The teeth of the spider transfer the force to the inside driven clutch. The inside driven clutch turns the inside wheel at the same speed as the bevel gear. The inside driven clutch provides the power that is necessary to move the machine through the turn.The traction of the road causes the outside wheel to turn at a speed that is faster than the speed of the bevel gear. This action causes the driven clutch for the outside wheel to turn faster than the speed of the bevel gear. The movement of one wheel faster than the movement of another wheel begins the clutch action of the NoSPIN differential.The cam for the driven clutch of the inside wheel has teeth. The teeth are engaged with the teeth of center cam (15). The teeth stay in the same position in relation to spider assembly (17). The teeth of the inside drive clutch are engaged with the spider. The teeth on the other side of center cam (15) are used as ramps. The cam for the driven clutch of the outside wheel has teeth. The teeth move up the teeth of center cam (15). This action causes the outside driven clutch to move away from the spider and from center cam (15). The outside driven clutch is not engaged with the spider.The driven clutch for the outside wheel cannot engage with the spider until the speed of the outside wheel slows to the lower speed of the bevel gear. The holdout ring prevents the driven clutch from