CLEANER- 1898679 - Caterpillar

Radar information will not be used to determine the exact position of the object. Only the general area of the object relative to the machine will be displayed. The operator must use the camera for the designated machine quadrant to determine if the object is in the path of the machine and evasive action is required.
Camera View
This function allows the operator to select camera views on four sides of machine as an aid to identifying the object that has been detected. The camera is enabled whenever the system is powered up. Camera views are available in all machine modes. Typically, the camera view will occupy one quarter of the main screen. The operator can toggle between camera views with the arrow button or by touching one of the four zones on the radar portion of the touchscreen display. Press the "OK" button in order to view the camera view in a full screen. Additionally, the operator can touch the small camera view in order to view the camera view in a full screen. Press the "OK" button in order to return the camera view to a small view. Touching the camera view again will put the camera back into a small view also. Refer to Illustration 4.
Illustration 4 g02226794
(1) Minimized Camera View (2) Full Screen Camera ViewThe display will select the camera view that is dependent on the transmission gear that is selected and/or the status of the system. The camera view is dependent on the criteria below:Forward Gear Camera Switching
When the operator shifts the transmission from Neutral to the Forward gear, the display will switch to the view from the front camera. If there are no objects detected at the time of transition, the display will remain on the view from the front camera.Note: The display will provide a visual indication of objects that are detected at the rear of the machine on the radar view. However, the display will not change to the view from the rear camera while the transmission is in the Forward gear.The display will switch to one or the other side camera views or the front camera view based on the location of the detected objects. The camera views will have the following priority:
Right side
Front
Left side
Rear (excluded when transmission is in the Forward gear)Note: Once the detected object is clear of the alarming quadrant, the camera view will remain in the current position until object detection occurs on the right, front, or left quadrant. The camera view will not return to the view in use prior to the object detection.Reverse Gear Camera Switching
When the operator shifts the transmission from Neutral to the Reverse gear the display will switch to the rear camera view. The display will remain in the rear camera view regardless of critical zone alarms active on the sides of the machine. While the transmission is in the Reverse gear and critical zone alarms are active, the visual indication of the alarms will be shown on the radar view and the