CLEANER AS 3C8579 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01197420
Position gear (5), bearing (6), and thrust washers (4) into the housing. Install pin (2) and pin (3).
Install ring (1). End By:
Install the planetary transfer gear. Refer to Disassembly and Assembly, "Transfer Gear Planetary - Remove".