CLEANER GP- 6I2548 - Caterpillar

Slope Sensor Calibrations
Table 2
Error Codes That Can Be Activated When Slope Sensor Calibrations Are Performed
Error Code Probable Cause of Activation Recommended Actions
0x0006 - Calibration Aborted By User The slope sensor calibration was aborted by the user Start slope sensor calibration over
0x1018 - Parking Brake Not Engaged The parking brake was not engaged Verify the parking brake switch is pressed
Verify there are no active faults on parking brake
0x1010 - Engine Stopped (No Engine RPM) The engine is not running Start engine
0x101B - Machine Speed Not Zero The machine is moving while attempting calibration Use the service brake to stop the machine
0x110B - Implement Pilot Supply Off The implement pilot supply valve is off while attempting calibration Verify the implement lockout switch is off
Verify there are no active faults on the implement pilot supply valve
0x114D - Invalid Calibration Limits The read slope sensor calibration value is not valid Verify blade is sitting on level ground
Verify proper mounting of blade