CLEVIS 1508760 - Caterpillar

Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag to the start switch before you service or repair the equipment . These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
445-6906 Auxiliary Hydraulic Lines GpRevision - 01
Item Qty Part No Description
(1) 2 335-5131 Tube As
(2) 2 371-3126 Hose As
(3) 2 442-0234 Ball Valve
(4) 8 453-2836 Bolt
(5) 6 1P-3705 Rectangular Seal
(6) 8 306-1355 Half Clamp
(7) 8 5P-8077 Half Flange
(8) 4 453-2840 Bolt
(9) 16 447-1707 Bolt
(10) 8 447-1711 Bolt
(11) 36 451-2175 Hard Washer
Illustration 2 g03657904
445-6906 Auxiliary Hydraulic Lines Gp
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, hose assemblies, harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. Plugging hoses and tubes helps to prevent fluid loss, and helps to keep contaminants from entering the system.
Illustration 3 g03657906
(1) 335-5131 Tube As
(2) 371-3126 Hose As
(3) 442-0234 Ball Valve
(4) 453-2836 Bolt
(5) 1P-3705 Rectangular Seal
(6) 306-1355 Half Clamp
(7) 5P-8077 Half Flange
(8) 453-2840 Bolt
(9) 447-1707 Bolt
(10) 447-1711 Bolt
(11) 451-2175 Hard Washer
Install stick lines group onto the left and right side of the stick.
Unless specified, tighten all hardware and fittings to standard torque. Reference: Torque Specifications, SENR3130, "Torque Specifications"
Illustration 4 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard when checking for a leak.Do not check for pin hole leaks in pump or motor hoses during a steer stall condition. If fluid is injected into your skin, it must be treated by a doctor familiar with this type of injury immediately.
Inspect for fluid leaks when the installation is complete.