CLEVIS 2195893 - Caterpillar

Torque for nut on clamp of seal assemblies (two), on oil lines from tank to pump ... 73 3 lb. ft.(98 4 N m)Torque for body bolts (eight) ... 85 5 lb. ft.(115 7 N m)Rotation is counterclockwise when seen from drive end.Type of pump: Gear.For test, use SAE 10W oil at 150°F (65°C).Large Section (Shaft End)
Test at Full Speed:Output ... 71.0 U.S. gpm (269.0 liter/min)at a pressure of ... 100 psi (690 kPa)with pump at ... 1818 rpmwith engine at ... 1375 rpmOutput ... 68.0 U.S. gpm (257.4 liter/min)at a pressure of ... 1000 psi (6900 kPa)with pump at ... 1818 rpmwith engine at ... 1375 rpmTest at Half SpeedOutput ... 36.0 U.S. gpm (136.3 liter/min)at a pressure of ... 100 psi (690 kPa)with pump at ... 909 rpmwith engine at ... 688 rpmOutput ... 33.0 U.S. gpm (125.0 liter/min)at a pressure of ... 1000 psi (6900 kPa)with pump at ... 909 rpmwith engine at ... 688 rpmSmall Section (Cover End)
Test at Full SpeedOutput ... 23.0 U.S. gpm (87.0 liter/min)at a pressure of ... 100 psi (690 kPa)with pump at ... 1818 rpmwith engine at ... 1375 rpmOutput ... 21.0 U.S. gpm (79.5 liter/min)at a pressure of ... 1000 psi (6900 kPa)with pump at ... 1818 rpmwith engine at ... 1375 rpmTest at Half SpeedOutput ... 13.0 U.S. gpm (49.2 liter/min)at a pressure of ... 100 psi (690 kPa)with pump at ... 909 rpmwith engine at ... 688 rpmOutput ... 11.0 U.S. gpm (42.0 liter/min)at a pressure of ... 1000 psi (6900 kPa)with pump at ... 909 rpmwith engine at ... 688 rpm