2881088 CLIP-CABLE Caterpillar parts
3412C, C3.3, C4.4, C6.6
Rating:
Alternative (cross code) number:
CA2881088
288-1088
2881088
CA2881088
288-1088
2881088
Weight: 0.03 pounds 0 kg.
Information:
CENTERLINE OF BOLT TO TUBE
26.92
mm
ID
31.75
mm
MOUNTING BOLT SIZE
0000005.2000
THICKNESS
1.5
mm
VINYL COATED
N
WIDTH
12.7
mm
GENERATOR SET,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
IMIFAFTAbT 6 PCS Fuel injector 2881088 Compatible with Cummins QSK19 QSK38 QSK50 Engine
IMIFAFTAbT Product Name: 2881088 Fuel injector || Part number: 2881088 || Compatible with Cummins QSK19 QSK38 QSK50 Engine || 6 PCS Fuel injector || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
IMIFAFTAbT Product Name: 2881088 Fuel injector || Part number: 2881088 || Compatible with Cummins QSK19 QSK38 QSK50 Engine || 6 PCS Fuel injector || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
6X 2881088 Fuel Injector Fits for Cummins QSK19 Engine
XYohykai ◆Part Name◆:Fuel Injector || ◆Part Number◆:2881088 || ◆Application◆:Fits for Cummins QSK19 Engine || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || ◆Worth Choice◆-This product has stable performance high reliability easy installation and fast response.
XYohykai ◆Part Name◆:Fuel Injector || ◆Part Number◆:2881088 || ◆Application◆:Fits for Cummins QSK19 Engine || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || ◆Worth Choice◆-This product has stable performance high reliability easy installation and fast response.
6PCS Fuel Injector 2881088 Compatible with Cummins QSK19 Engine
DJCXYSM Product Name:Fuel Injector || Part Number:2881088 || Application: Compatible with Cummins QSK19 Engine || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tip: If you have any questions before or after sale please contact us in time. We'll help you out as soon as possible.
DJCXYSM Product Name:Fuel Injector || Part Number:2881088 || Application: Compatible with Cummins QSK19 Engine || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tip: If you have any questions before or after sale please contact us in time. We'll help you out as soon as possible.
Number on catalog scheme:
30
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
If the turbocharger has an exhaust elbow, remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install".
Loosen the hose clamp and disconnect the air inlet hose from the turbocharger.
Loosen the hose clamp and disconnect the air outlet hose from the turbocharger.
If the turbocharger has a remote wastegate solenoid, disconnect the hose to the solenoid from the turbocharger.
Illustration 1 g01335754
Remove bolts (5) in order to disconnect tube assembly (4) from the cylinder block. Remove joint (3).
Remove bolt (8) in order to disconnect tube assembly (7) from the cylinder block.
Remove the bolts for tube clips (2).
Loosen nuts (11). Refer to Illustration 2.
Remove exhaust manifold (1) and the assembly of the turbocharger from the cylinder head. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install" for the correct procedure.
Illustration 2 g01335756
Remove banjo bolt (9) and remove tube assembly (7) for the oil feed from turbocharger (12). Remove sealing washers (10).
Remove O-ring seal (6) from tube assembly (7). Refer to Illustration 1.
Remove bolts (14) and remove tube assembly (4) for the oil drain from turbocharger (12).
Remove joint (13).
Remove nuts (11) and remove turbocharger (12) from exhaust manifold (1). Note: Ensure that the exhaust manifold and the turbocharger are adequately supported during the removal of the turbocharger.
Remove joint (15) from the exhaust manifold (1).
If necessary, remove studs (16) from exhaust manifold (1).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
If the turbocharger has an exhaust elbow, remove the exhaust elbow. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install".
Loosen the hose clamp and disconnect the air inlet hose from the turbocharger.
Loosen the hose clamp and disconnect the air outlet hose from the turbocharger.
If the turbocharger has a remote wastegate solenoid, disconnect the hose to the solenoid from the turbocharger.
Illustration 1 g01335754
Remove bolts (5) in order to disconnect tube assembly (4) from the cylinder block. Remove joint (3).
Remove bolt (8) in order to disconnect tube assembly (7) from the cylinder block.
Remove the bolts for tube clips (2).
Loosen nuts (11). Refer to Illustration 2.
Remove exhaust manifold (1) and the assembly of the turbocharger from the cylinder head. Refer to Disassembly and Assembly, "Exhaust Manifold - Remove and Install" for the correct procedure.
Illustration 2 g01335756
Remove banjo bolt (9) and remove tube assembly (7) for the oil feed from turbocharger (12). Remove sealing washers (10).
Remove O-ring seal (6) from tube assembly (7). Refer to Illustration 1.
Remove bolts (14) and remove tube assembly (4) for the oil drain from turbocharger (12).
Remove joint (13).
Remove nuts (11) and remove turbocharger (12) from exhaust manifold (1). Note: Ensure that the exhaust manifold and the turbocharger are adequately supported during the removal of the turbocharger.
Remove joint (15) from the exhaust manifold (1).
If necessary, remove studs (16) from exhaust manifold (1).
Caterpillar parts catalog:
Parts clip Caterpillar catalog:
9M9738
CLIP
3512B, 3512C, 561C, 571G, 572G, 594, 824B, 834, 988, 992, C7, C9, D5, D6C, D7F, D7G, D8H, D9G
3512B, 3512C, 561C, 571G, 572G, 594, 824B, 834, 988, 992, C7, C9, D5, D6C, D7F, D7G, D8H, D9G
1447181
CLIP-RETAINING
3306B, 3406C
3306B, 3406C
120G, 12G, 130G, 140G, 14G, 160G, 16G, 301.6C, G3408, G3408B, G3408C, G3412, G3412C
3207691
CLIP
627H, 627K, 725C, 730C, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX31-P600, D6T LGP, D6T LGPPAT, D6T XL, G3412, G3412C, R3000H
627H, 627K, 725C, 730C, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX31-P600, D6T LGP, D6T LGPPAT, D6T XL, G3412, G3412C, R3000H
4L0634
CLIP-GUARD
3408, 3408E, 3412, 3412C, 3512, D343, D348, D353C, D379
3408, 3408E, 3412, 3412C, 3512, D343, D348, D353C, D379
1292270
CLIP
3508B
3508B
2064284
CLIP
797, 797B, G3520B, G3520C
797, 797B, G3520B, G3520C
5P2370
CLIP
3412C, 3412E, 631E, 637D, 637E, 768C, 769C, 772, 773B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 950 GC, 980H, 988F, AP-800, C15, C175-16, D7G, D9H
3412C, 3412E, 631E, 637D, 637E, 768C, 769C, 772, 773B, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 950 GC, 980H, 988F, AP-800, C15, C175-16, D7G, D9H
2F6578
CLIP
191, 3406E, 3456, 977H, 977K, 977L, C13 XQ350, C15, PM3456
191, 3406E, 3456, 977H, 977K, 977L, C13 XQ350, C15, PM3456
0026159
CLIP
G3516B
G3516B
2572027
CLIP
G3508
G3508
G3508, G3508B, G3512, G3512B, G3516, G3516B, G3520B, PMG3516