CLIP-CONDUIT 2U4744 - Caterpillar

Illustration 1 g00776068
Note: If the machine is equipped with a mix height dial, the dial MUST be set above the minimum setting. If the dial is set to the minimum setting, the conveyors will not operate.These switches are used to control the drag conveyors. The left switch controls the left drag conveyor. The right switch controls the right drag conveyor.Move the switches upward to the AUTO (1) in order to run the drag conveyors automatically. The conveyors will be controlled by the sensors.Move the switches downward to the MANUAL (2) in order to manually run the conveyors. When the switches are set to MANUAL (2) , the conveyors will operate at full speed. Move the switches to the CENTER position in order to shut off the conveyors.