3C8501 CLIP Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8501
3C-8501
3C8501
CA3C8501
3C-8501
3C8501
Weight: 0.100 pounds 0 kg.
For full view, you need register
Information:
The Caterpillar Electronic Technician (ET)
Illustration 1 g00777826The Caterpillar Electronic Technician (ET) is a software program that is used to access data. The service technician can use the Caterpillar Electronic Technician in order to perform maintenance work on the machine. Some of the options that are available with the Caterpillar Electronic Technician are listed below:
view Diagnostic codes. See Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes".
Viewing active event codes and logged event codes
View the status of parameters.
Clear active diagnostic codes and clear logged diagnostic codes
Perform calibration of machine systems.
Program the ECM (Flash). This is done with the "WINflash" program. See Testing and Adjusting, "Electronic Control Module (ECM) - Flash Program".
Print reports.The following list contains some of the diagnostic functions and programming functions that are performed by the service tools.
The failures of the ECM system are displayed.
The status of most of the inputs and the outputs are displayed.
The settings for the ECM are displayed.
Display the status of the input and output parameters in real time.
Display the clock hour of the internal diagnostic clock.
The number of occurrences and the clock hour of the first occurrence and the last occurrence is displayed for each logged diagnostic code.
The definition for each logged diagnostic code and each event is displayed.
Load new FLASH software.See Troubleshooting, "Diagnostic Code List" for the list of diagnostic codes for the ECM.See Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes". Diagnostic information is accessed with the following drop down menus:
Active diagnostic codes
Logged diagnostic codesEvent Codes
Logged Event Codes
Illustration 2 g00815003
Typical ET screen for logged event codes
A logged event indicator is provided in order to monitor events that are intermittent. The data for a logged event will include the following information:
An event identifier (EID)
A text description of the problem
The number of occurrences of the problem
Time stamped information for the first occurrence of the problem
Time stamped information for the last occurrence of the problem
Table 1
Event Codes
EID Description
E155 "High Torque Converter Oil Temperature Warning"
E329 "Transmission Filter Plugged Warning"
E861 "Clock Manual Alignment Required Warning" Status Groups For The Electronic Technician
The Status groups are lists of machine parameters. The status of the parameters are shown in real time.
Illustration 3 g00530287
Typical ET Status Screen
Illustration 1 g00777826The Caterpillar Electronic Technician (ET) is a software program that is used to access data. The service technician can use the Caterpillar Electronic Technician in order to perform maintenance work on the machine. Some of the options that are available with the Caterpillar Electronic Technician are listed below:
view Diagnostic codes. See Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes".
Viewing active event codes and logged event codes
View the status of parameters.
Clear active diagnostic codes and clear logged diagnostic codes
Perform calibration of machine systems.
Program the ECM (Flash). This is done with the "WINflash" program. See Testing and Adjusting, "Electronic Control Module (ECM) - Flash Program".
Print reports.The following list contains some of the diagnostic functions and programming functions that are performed by the service tools.
The failures of the ECM system are displayed.
The status of most of the inputs and the outputs are displayed.
The settings for the ECM are displayed.
Display the status of the input and output parameters in real time.
Display the clock hour of the internal diagnostic clock.
The number of occurrences and the clock hour of the first occurrence and the last occurrence is displayed for each logged diagnostic code.
The definition for each logged diagnostic code and each event is displayed.
Load new FLASH software.See Troubleshooting, "Diagnostic Code List" for the list of diagnostic codes for the ECM.See Troubleshooting, "Using the Caterpillar Electronic Technician to Determine Diagnostic Codes". Diagnostic information is accessed with the following drop down menus:
Active diagnostic codes
Logged diagnostic codesEvent Codes
Logged Event Codes
Illustration 2 g00815003
Typical ET screen for logged event codes
A logged event indicator is provided in order to monitor events that are intermittent. The data for a logged event will include the following information:
An event identifier (EID)
A text description of the problem
The number of occurrences of the problem
Time stamped information for the first occurrence of the problem
Time stamped information for the last occurrence of the problem
Table 1
Event Codes
EID Description
E155 "High Torque Converter Oil Temperature Warning"
E329 "Transmission Filter Plugged Warning"
E861 "Clock Manual Alignment Required Warning" Status Groups For The Electronic Technician
The Status groups are lists of machine parameters. The status of the parameters are shown in real time.
Illustration 3 g00530287
Typical ET Status Screen