CLUTCH A 0304416 - Caterpillar

Do not fill fuel filters with fuel before installing them. The fuel will not be filtered and could be contaminated. Contaminated fuel will cause accelerated wear to fuel system parts. The fuel system should be primed prior to starting the engine.
Illustration 1 g01023696
Illustration 2 g01023697
Open the engine access door on the rear of the machine.
Support the water separator element (2) and rotate the locking ring (1) counterclockwise.
Remove the water separator element from the mounting base. Dispose of the used element properly.
Install the new water separator element. Rotate the locking ring clockwise in order to fasten the filter to the mounting base.
Prime the fuel system in order to fill the water separator element with fuel. Refer to Operation and Maintenance Manual, "Fuel System Priming Pump - Operate".