CLUTCH GP-STEER 0R4801 - Caterpillar

Removal Procedure
Start By:
Remove the fuel tank. Refer to Disassembly and Assembly, "Fuel Tank - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of all seals and of all components. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00454269
The cab has been removed for clarity.
Disconnect rod assembly (1) and (2) from the levers that are on the control valve.
Disconnect tube assemblies (3), (4) and (5).
Disconnect hose assembly (6).
Illustration 2 g00454271
Remove bolts (7) and (8).
Remove steering clutch hydraulic control valve (9).
Illustration 3 g00412345
Remove five O-ring seals (10). Check the condition of the seals. If the seals are worn or damaged, use new seals for replacement.