CLUTCH 1V6267 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
(A)     1P-0520     Driver Group     1    
(B)     1P-0510     Driver Group     1    
(C)     9U-5986     Eyebolt     1    
1U-8223 Lifting Sling     2    
Illustration 1 g00351692
Illustration 2 g00367912
Use Tooling (A) and a hammer to install one inner lip seal into the offset pin bore. Install the seal so that the lip is facing toward the outside of the bearing bore. Make sure that the seal makes contact with the end of the inside bore.
Repeat 1 for the inner lip seal on the other side of the offset boom.
Lower the temperature of the sleeve bearing. Use Tooling (A) and a hammer to install one sleeve bearing into the offset pin bore.
Repeat 3 for the sleeve bearing on the other side of the offset boom.
Use Tooling (A) to install one outer lip seal into the offset pin bore. Install the seal so that the lip is facing toward the outside of the bearing bore. Make sure that the seal makes contact with the sleeve bearing.
Illustration 3 g00367953
Install Tooling (C) onto pin assembly (4). Attach Tooling (C) to a hoist or a lift truck. Apply 5P-0960 Molybdenum Grease on pin assembly (4). Install pin assembly (4) .
Illustration 4 g00367892
Install three bolts (6) and plate (5) on each side of the offset boom.End By: Install the offset boom. Refer to Disassembly and Assembly, "Offset Boom - Install".