CLUTCH AS 2329097 - Caterpillar

Illustration 1 g00644516
Location of the filter element for the cab
(1) Cover
(2) Retaining screws The filter element for the cab is located inside the operator's compartment.
Loosen retaining screws (2). Remove cover (1) and the filter element.
Wash the filter element in a nonsudsing detergent.
Rinse the filter element in clean water. Allow the filter element to air dry.
Install the clean filter element and cover (1). Tighten retaining screws (2). Note: When rips or tears are noticed in the filter element, install a new filter element. When a reduction of air circulation is noticed in the cab after cleaning the filter element, install a new filter element.