CLUTCH GP-ELECTRIC 2971860 - Caterpillar

Illustration 1. Hydraulic motor drive plate in FT1549 Fixture for removal of spanner nut with FT1532 Spanner Socket.
Illustration 2.The FT1531 and FT1550 Rods (see Illustration 3) are used to remove the bearing from the drive plate. The FT1531 Rod has a 10.03 mm (.395") diameter, and the FT1550 Rod has an 8.585 mm (.3379") diameter. Two rods are needed because two sizes of holes were used in the drive plates.
Illustration 3. FT1531 Rods installed during bearing removal.Because of a change in the spanner nuts, cast slots instead of machined slots, the 5P2684 Spanner Socket will not fit the spanner nut. The FT1532 Spanner Socket is made from the 5P2684 Spanner Socket as shown in Illustration 4.
Illustration 4. Dimensions and specifications for FT1532 Spanner Socket.The FT1549 Fixture, FT1531 Rod and FT1550 Rod are replacements for the 5P3019 Fixture Plate Group, 5P2982 and 5P2985 Pins which are canceled. See Illustrations 5 and 6 for dimensions and instructions to fabricate these tools.
Illustration 5. Dimensions and specifications for FT1549 Fixture.
Illustration 6. Dimensions and specifications for FT1531 and FT1550 Rods.