CLUTCH GP-STEERING 6S3528 - Caterpillar

S3B
Illustration 1 g00325011
(1) End play for the new shaft ... 0.102 0.025 mm (.004 .001 inch)Apply 5P-3931 Anti-Seize Compound on all of the threads of the nuts. Torque for bolts and nuts that hold the turbocharger to the exhaust manifold ... 55 5 N m (40 4 lb ft)Install the band clamps that hold the cartridge to the compressor housing, as follows:Tighten the clamps to the following torque. ... 14 1.1 N m (125 10 lb in)Gently tap around the clamp.Tighten the clamps again to the following torque. ... 14 1.1 N m (125 10 lb in)Note: Put clean engine oil in the oil inlet of the turbocharger after assembly or before installation in order to provide lubrication during start-up and/or storage protection.