CLUTCH GP 9U9958 - Caterpillar

Illustration 1 g00603573
Dual air inlet tube (1) Air inlet manifold (2) Atomizer for three rear cylinders Tighten to the following torque. ... 2.8 N m (25 lb in) (3) Atomizer for three front cylinders Tighten to the following torque. ... 2.8 N m (25 lb in)Note: The mark on each orifice indicates the direction of spray. The mark on the front orifice must point to the front of the engine. The mark on the rear orifice must point to the rear of the engine. The direction is very important in order to avoid spraying ether on the air inlet heater element. (4) Air inlet heater (5) Air inlet elbow