COIL AS-EVAPORATOR 1084637 - Caterpillar

Minimum Forward Gear Function
This feature is defaulted to "ON", but can be configured to either "ON" or "OFF" using Cat ET. This function limits the minimum ground speed of the vehicle. The ECU prevents downshifting to any gear that is lower than minimum gear. The value for the minimum gear is stored in the ECU. The value of the minimum gear is programmable by the service personnel. The value of the minimum gear is programmed at the factory to the minimum gear for the particular vehicle model. Note: The Cat ET service tool can be used to program the minimum gear function. Use the configuration screen in the Cat ET service tool in order to change the minimum gear setting.The range of numbers for the CX35 are listed below. Factory setting ... 1 Range ... 1 to 8Rapid Downshift Function
The ECU does not allow a turnaround shift until a short time after a shift occurs. A turnaround shift is an opposite shift from the previous shift. For example, a downshift is prevented for a short time after an upshift and an upshift is prevented for a short time after a downshift. The turnaround feature allows the conditions to stabilize before an opposite shift. The delay prevents hunting between gears.Start Gear
When the "D" is pressed