COIL AS 1263707 - Caterpillar

Illustration 2 g03006376
Section A-A
Table 2
Item Qty Part Specification Description
F 4 192-0573 Dowel Pin Extension of the dowel pin from the surface of the body (6) is 2.67 to 2.92 mm (0.105 to 0.115 inch).
7 4 193-1736 O-Ring Seal Lubricate lightly with the lubricant that is being sealed.
8 1 423-2128 Driven Barrel Port location of both the barrel ports must be matched when the right pump and the left pump assemble.
9 1 273-8314 O-Ring Seal Lubricate lightly with the lubricant that is being sealed.
10 2 273-8315 O-Ring Seal Lubricate lightly with the lubricant that is being sealed.
11 18 341-2872 Spring Length under test force is 31 mm (1.2 inch).
Test force is 233.3 23.0 N (52.4 5.2 lb).
Free length after test is 36 mm (1.4 inch).
Illustration 3 g03006498
Section C-C
Table 3
Item Qty Part Specification Description
12 2 190-4896 Plug Before assembly, apply blue Loctite 5188 to the threads.
Torque to 25 3 N m (221 27 lb in)
13 2 247-8920 Orifice Torque to 13 2 N m (115 18 lb in)
Illustration 4 g03880496
Section G-G
Illustration 5 g02792370
Section H-H
Table 4
Item Qty Part Specification Description
14 2 4I-1022 Orifice Torque to 13 2 N m (115 18 lb in).
15 2 8J-4645 Plug Torque to 210 to 231 N m (155 to 170 lb ft).
16 2 7M-8485 O-Ring Seal Lubricate lightly with the lubricant that is being sealed.
17 1 096-3944 O-Ring Seal Lubricate lightly with the lubricant that is being sealed.
18 1 341-2862 Lip Type Seal Lightly lubricate the sealing lip with the lubricant that is being sealed.
19 2 8T-4136 Bolt Torque to 44 4 N m (32 3 lb ft).
J 4 094-1875 Dowel Extension of the dowel from the body (20) is 5.55 to 5.80 mm (0.219 to 0.228 inch).
21 1 423-2123 Drive Barrel Port location of both the barrel ports must be matched when the right pump and the left pump assemble.