1536935 COIL AS-HEATER Caterpillar parts
902, 906, 908
Rating:
Alternative (cross code) number:
CA1536935
153-6935
1536935
CA1536935
153-6935
1536935
Weight: 4 pounds 2 kg.
COMPACT WHEEL LOADER,
Number on catalog scheme:
8
For full view, you need register
Information:
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.
Engine Oil Level (Tractor)
Illustration 1 g01159817Oil level gauge (1) for the tractor engine is located on the right side of the tractor.
Park the machine on level ground. Engage the parking brake.
Lower the bowl to the ground.
Open the engine access cover that is on the right side of the machine.
Clean the area around the oil level gauge.
Check the "LOW IDLE" side of the oil level gauge while the engine is running. Maintain the oil level between the "ADD" mark and the "FULL" mark. Check the "ENGINE STOPPED" side of the oil level gauge while the engine is stopped. Maintain the oil level between the "ADD" mark and the "FULL" mark.Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at the "FULL" mark on the "ENGINE STOPPED" side of the oil level gauge.
Illustration 2 g01157301
Clean the area around oil filler cap (2).
If necessary, add oil by removing the oil filler cap.
Clean the oil filler cap and install the oil filler cap.
Close the engine access cover. Engine Oil Level (Scraper)
Illustration 3 g01157299Oil level gauge (3) for the scraper engine is located on the left side of the scraper.
Park the machine on level ground. Engage the parking brake.
Lower the bowl to the ground.
Clean the area around the oil level gauge.
Check the "LOW IDLE" side of the oil level gauge while the engine is running. Maintain the oil level between the "ADD" mark and the "FULL" mark. Check the "ENGINE STOPPED" side of the oil level gauge while the engine is stopped. Maintain the oil level between the "ADD" mark and the "FULL" mark.Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at the "FULL" mark on the "LOW IDLE" side of the oil level gauge.
Clean the area around the oil filler cap. Refer to Illustration 2.
If necessary, add oil by removing the oil filler cap.
Clean the oil filler cap and install the oil filler cap.
Caterpillar parts catalog:
Parts coil Caterpillar catalog:
2223870
COIL AS
120M, 12M, 140M, 143H, 160M, 16H, 216, 216B, 226B, 228, 232B, 236, 236B, 242B, 247, 247B, 248, 252B, 257B, 267, 267B, 268B, 287, 301.5, 302.5, 303.5, 303.5E, 303E CR, 304.5, 304E, 305.5E, 305E, 307D, ...
120M, 12M, 140M, 143H, 160M, 16H, 216, 216B, 226B, 228, 232B, 236, 236B, 242B, 247, 247B, 248, 252B, 257B, 267, 267B, 268B, 287, 301.5, 302.5, 303.5, 303.5E, 303E CR, 304.5, 304E, 305.5E, 305E, 307D, ...
216, 226B, 228, 232B, 236, 236B, 242B, 247, 247B, 248, 252B, 257B, 267, 267B, 268B, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D, 446B, 446D, 79...
1890173
COIL AS
416C, 420D, 424D, 426C, 428C, 430D, 432D, 436C, 438C, 442D, 902, 906, 933C, 939C, D3C III, D4C III, D5C III
416C, 420D, 424D, 426C, 428C, 430D, 432D, 436C, 438C, 442D, 902, 906, 933C, 939C, D3C III, D4C III, D5C III
1274402
COIL AS
416C, 426C, 436C, 438C, 438D, 442D, 902, 906
416C, 426C, 436C, 438C, 438D, 442D, 902, 906
1720970
COIL AS
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 902, 904B, 904H, 906, 906H, 906H2, 907H, 907H2, 9...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 902, 904B, 904H, 906, 906H, 906H2, 907H, 907H2, 9...
1521123
COIL AS
216, 902, 906, 908
216, 902, 906, 908
420D, 430D, 432D, 442D, 902, 906, 908, D3G, D4G, D5G
120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 216, 216B, 226B, 232B, 236, 236B, 242B, 246C, 247, 247B, 24M, 252B, 256C, 257B, 262C, 267, 267B, 268B, 272C, 277C, 279C, 287, 287C, 289C...
216, 216B, 216B3, 226B, 226B3, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 272D, 272D XHP, 287, 299D, 299D XHP, 414E, 416E, 416F, 420E, 420...
2280595
COIL AS
902, 906, 908
902, 906, 908
2115872
COIL AS-EVAPORATOR
906, 908
906, 908
2125793
COIL AS-HEATER
906, 908
906, 908
2280595
COIL AS
902, 906, 908
902, 906, 908
1265607
COIL AS-HEATER
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 962G, 966G, 972G, 980G, 988G, 988H, IT62G
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 962G, 966G, 972G, 980G, 988G, 988H, IT62G
1720933
COIL
143H, 163H NA, 950F II, IT62G
143H, 163H NA, 950F II, IT62G
1566181
COIL AS
120H, 120H ES, 120H NA, 135H NA, 962G, IT62G
120H, 120H ES, 120H NA, 135H NA, 962G, IT62G
1771759
COIL AS-EVAPORATOR
651E, 657E
651E, 657E
3283316
COIL AS
924G, 924H, 924HZ, 928H, 928HZ, 930G, CP-56, CP-64, CP-76, CS-423E, CS-44, CS-533E, CS-54, CS-54B, CS-56B, CS-68B, CS-74, CS-74B, CS-78B, IT28G
924G, 924H, 924HZ, 928H, 928HZ, 930G, CP-56, CP-64, CP-76, CS-423E, CS-44, CS-533E, CS-54, CS-54B, CS-56B, CS-68B, CS-74, CS-74B, CS-78B, IT28G
950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H, 986H, IT62G II, IT62H
16M, 24M, 5110B, 824G II, 924G, 924GZ, 930G, 938G II, 938H, 950G II, 950H, 962G II, 962H, 966G II, 966H, 966K, 966M, 966M XE, 972G II, 972H, 972K, 972M, 972M XE, 980G II, 980H, 980K, 980K HLG, IT28G, ...
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 621G, 623G, 627G, 631G, 637G, 657G, 725, 730, 735, 735B, 740, 740B, 769D, 770, 770G...
1297705
COIL AS
120H, 120H ES, 120H NA, 135H, 962G, IT62G
120H, 120H ES, 120H NA, 135H, 962G, IT62G
2125793
COIL AS-HEATER
906, 908
906, 908
2115872
COIL AS-EVAPORATOR
906, 908
906, 908